Balboa OEM Heater ASSY, M7 Sensors, Power Cord, VS100, 4.0KW, 10 in x 1.5 in, 58198

Out of stock
Out of stock

Balboa brand OEM Heater Assembly with M7 Dual Sensors and Power Cord. This is the "Original" heater by Balboa. OEM part number 58198-01.

THIS HEATER HAS A REPLACEMENT. TO PLACE AN ORDER, PLEASE SEE PART NUMBER 25-200-7414 Balboa OEM Heater ASSY KIT, VS100, 4.0KW 220V, 10 in x 1.5 in, w/36in Sensors and Cable, Tailpieces and Gaskets. IT OUTPUTS 1.0KW ON 110V, AND 4.0KW ON 220V.

SpaGuts P/N: 25-175-8198


  • Stainless Steel Heater Housing
  • 4.0KW 220V Incoloy Flo-Thru Heater Element
  • Outputs 1.0KW on 110V Application
  • Top Mounted Electrical Box
  • Balboa OEM M7 Dual Sensors, 36-inch, 25283
  • Power Cord with 3-Prong Amp Plug, 36-inch
  • Pair of 1.5" Heater Split Nuts
  • Pair of 1.5" Heater Tailpieces with O-Ring Gaskets

Heater Dimensions are approximately 10" L x 1.5" Diameter (Actual hole diameter is 1.9").

NOTE 1: The heater element is NON-Replaceable.

NOTE 2: The heater may have been originally labeled 1.0KW 120V, but a 4.0KW 240 Element was actually installed. Resistance reading between the two heater terminals will be between 13 to 15 Ohms.

This heater is compatible with the following Balboa VS100 Control Systems and Kits: 54805, 54821, G4111

This heater is also a replacement option for the following heater part numbers: 58205, 28203-01, 58203, 26-58203-K, G7414 (No Tailpieces and Gaskets), 26-58203-K, 26-58198-K

This item carries a 1-year limited warranty.

Write Your Own Review
You're reviewing:Balboa OEM Heater ASSY, M7 Sensors, Power Cord, VS100, 4.0KW, 10 in x 1.5 in, 58198
Your Rating
Contact Us