Balboa Spa Controller Kit, BP7, TP500 Topside, 5.5KW HTR, NO Cords/Cables (SPECIAL ORDER)

Balboa Spa Controller Kit, BP7 Model, with TP500 Topside Panel, 5.5KW Heater, Wifi Enabled.

NOTE: Component Cords and Cables are Sold Separately.

SPECIAL ORDER NOTES: THIS ITEM IS A SPECIAL ORDER AND HAS AN ESTIMATED 2-5 BUSINESS DAYS LEAD TIME BEFORE SHIPPING. SPECIAL ORDERS ARE NON-RETURNABLE AND CANNOT BE CANCELED ONCE THE ORDER IS PLACED.

This controller operates on 220V 60Hz (220V requires 4-wire service, Neutral is Required). The BP7 controller is equipped with Balboa Water Group's patented M7 technology which allows the heater to be mounted either on the suction or discharge side of the pump for simplified installation. M7 Technology also completely eliminates the pressure switch which otherwise requires occasional manual adjustment making the BP7 an ideal choice if a pressure switch is not necessary on your spa configuration.

Field Configuration is required by your installer. This includes set-up of Internal component circuits, Dip Switches and Program Setting to work with your existing Pump 1, Pump 2, Blower or Pump 3, Ozone, Circulation Pump, and the included Balboa TP500 Model Topside Panel.

SpaGuts P/N: 11-200-4347

Features:

• Balboa BP7 Spa Control System, G5361
• Balboa TP500 Topside Panel, 57238
• Balboa Topside Overlay, 17183
• Program Setting from Compatible Balboa Topside Panel
• Wifi Enabled (Wifi Module Sold Separately)
• M8 Pump Saver Technology
• 110/220V 60Hz (220V requires 4-wire service, Neutral is Required)
• Pump 1 circuit, 2 speed, 110/220V, 12A Max*
• Pump 2 circuit, 1 or 2 speed, 110/220V, 12A Max*
• Blower/Pump 3/MicroSilk circuit, 1 speed, 110/220V, 12A Max
• Circ Pump circuit, 110/220V, 2A Max (24Hr; Pump 1 available as 1-speed when activated; Requires 25 GPM, Circ and Ozone MUST be the same voltage)*
• Ozone circuit, 110/220V, 1A Max*
• Audio/Video circuit, 110/220V, 2A Max (Constant Circuit)
• 12V 12W Light circuit
• 5.5KW, 240V Flo-Thru Incoloy High Flow heater with M7 technology
• Stainless steel heater housing
• No Pressure Switch. Heater can be installed on suction or discharge side of pump
• Quick Disconnect Heater Cable
• Y-Cable, 25657
• UL Recognized for your safety
• Freeze protection
• High-limit protection
• Filtration mode
• Economy Mode
• Tech Book (Only Available Online. See Tabs Above)
• 1-Year Limited Warranty

*NOTE: See Wiring Diagram for Amperage Limitation when Multiple Components are connected

Dimensions (Approx.):

• Controller: 12.64 inch L x 11.5 inch H x 4.8 inch W
• Heater: 15.0 inch L x 2.0 inch Diameter
• Topside:  6.32 inch x 2.25 inch

Compatible Balboa Topside Panels (Sold Separately):

• TP200T, TP200W, TP500S, TP400T, TP400W, TP600, TP700, TP800, TP900, SpaTouch

WIFI Optional (Sold Separately):

• iPhone App! Control your spa from your iPhone, iPad, or iPod!

Add the optional Balboa Wi-Fi Module, 50350, download one of the iPhone Apps, and use your iPhone, iPad, iPod or computer to control your Balboa BP7 Model Controller remotely! Also works with Android! The Balboa BP7 Model Controller are pre-program with the software capable of Wi-Fi control. Imagine the possibility of being able to monitor your spa and control it remotely within your Wi-Fi network with the Home App, or do it all remotely from across country with the World App using the internet. Basically Amazing!!!

• (*iPhone, iPad, iPod and computer are not included)

This control system is also an alternative replacement for the following part numbers: G5361 (System), 51-G5361-K, 50-B7-500-55-K (Kit with Topside), Balboa BP501G1, Balboa BP501G2, Balboa BP501G3