Balboa Topside Kit, VL404 Digital Duplex plus Overlay, 51223

Replacement Balboa Topside Kit, Digital Duplex, with LED display, model VL404 E6 DIG DUPLEX.OEM part number 51223. This topside panel replaces all previous Digital Duplex LED model, and only works with Balboa spa controllers that works with this topside.

SpaGuts P/N: 30-200-1223

This topside panel uses an 8-wire phone-type RJ45 plug with 7ft cord.

FEATURES:

• Balboa Topside Panel, No Overlay, VL404 E6 DIG DUPLEX, 54145
• Balboa Overlay, 10307
• Button Configuration: (4-Button) Set, Jets, Blower, Light
• Cable Length (Approx.): 7ft Long
• Cable Plug: 8-Pin Phone-Type Connector
• Topside Dimensions (Approx.): 7.31 inch x 3.25 inch
• 1-Year Limited Warranty for Topside Panel
• 90-Day Limited Warranty for Overlay

This topside panel is also a replacement option for the following topside part numbers: Balboa 55155, Balboa 51419-01, Balboa 51631, ELE09200520 (Cal Spa), Balboa 51794, Balboa 51765, Balboa 51403 (1900D ThermoSpas), Balboa 51436, Balboa 53185, Balboa 51420, Balboa 51672, Balboa 50831, 30-175-1020, Balboa 52825 (25ft cable, No Overlay), Balboa 51629 (Verify button layout), Balboa 52522 (Used on HS55 System), 34-51223-K, Balboa 52918 (OMEGA OML4), Balboa 50908 (MOR100 Morgan 10ft cable), Balboa 54093 (LCD Version)

NOTE: A standard 54145 Topside (Panel Balboa VL404 E6 DIG DUPLEX) with a 10307 overlay will be provided in a clear sealed bag.

NOTE: Depending on availability, the Overlay/Label may ship with a different color, text, and/or button shape than the picture shown above.

When selecting your spa topside panel, it’s critical that you go by part numbers and not just by appearances or the model number. The part number on a spa topside panel can be found on a white sticker located directly under the topside panel (The ID label may be located on the casing of the topside panel, and the topside panel may need to be removed from the hot tub to get to this label). Buy based on this part number. Model numbers may provide many different options, and choosing the correct option is very critical. Do NOT purchase a hot tub topside panel just because it looks the same as the one you’re replacing. Spa topside panels can look identical, but be programmed differently to work with different spa controllers and circuit boards. ALSO pay attention to the type of cable plug that is on the end of the topside cable. Different spa topside panels use a certain type of cable plug that plugs into compatible spa controllers and circuit boards. Replacement spa topside panels are shipped in clear sealed bags with Yellow Warning Label. Verify through the clear sealed bag that the correct topside panel was received prior to opening the bag. Sealed bags that are opened voids the return policy for spa topside panels.