Balboa Topside Kit, Lite Duplex Digital LCD, VL401, 54094-01

SPRING SPECIAL SALES!!!

• REGULAR PRICE AT $164.95
• TOTAL SAVINGS OF $16
• SALES FROM 4/17/2025 TO 5/03/2025. WHILE SUPPLIES LAST! 
• SALES ITEM MUST BE PURCHASED BY 5/03/2025.

Replacement Balboa Topside Kit, 4-Button Lite Duplex Digital LCD, VL401. OEM part number 54094-01.

SpaGuts P/N: 30-200-4094

This topside panel uses an 8-wire phone-type RJ45 plug with 7ft cord.

Button Configuration: 4-Button (Blower-Jets-Temp-Light)

Topside dimension (Approx): 6.25 inch x 2.25 inch.

This topside is also a replacement option for the following part numbers: 51676 (LED Version), 3-00-8011, 58-138-1142, 34-54094-K, 611486, BAL54094, 9705-23, 3-00-8055 (LED Version), 58-138-1144 (LED Version), 611563 (LED Version), BAL51676 (LED Version), 9705-22 (LED Version), 51778 (QCA Spas), 30-175-1030, 52424-01 or G8241 (No Overlay; Verify button layout to match)

NOTE 1: A standard VL401 Lite Duplex Digital LCD Topside (Panel SpaGuts VL401 AUX/J/T/LT)with 10669 Overlay will be provided.

This item comes with a 1-year limited warranty.

If a longer cord is needed, Click here to see available extension cords.

NOTE 2: Depending on availability, the Overlay/Label may ship with a different color, text, and/or button shape than the picture shown above.

When selecting your spa topside panel, it’s critical that you go by part numbers and not just by appearances or the model number. The part number on a spa topside panel can be found on a white sticker located directly under the topside panel (The ID label may be located on the casing of the topside panel, and the topside panel may need to be removed from the hot tub to get to this label). Buy based on this part number. Model numbers may provide many different options, and choosing the correct option is very critical. Do NOT purchase a hot tub topside panel just because it looks the same as the one you’re replacing. Spa topside panels can look identical, but be programmed differently to work with different spa controllers and circuit boards. ALSO pay attention to the type of cable plug that is on the end of the topside cable. Different spa topside panels use a certain type of cable plug that plugs into compatible spa controllers and circuit boards. Replacement spa topside panels are shipped in clear sealed bags with Yellow Warning Label. Verify through the clear sealed bag that the correct topside panel was received prior to opening the bag. Sealed bags that are opened voids the return policy for spa topside panels.