Call (714) 764-0013
Replacement Balboa Topside Kit for Balboa's Heat Jacket Systems, 4-Button Mini Oval VL200 model with LCD display. OEM part number 53238. This topside control panel only works with Balboa Heat Jacket Systems.
SpaGuts P/N: 30-200-3238
Button configuration: Warm, Cool, Jets, Light
Topside dimension (Approx): 4.3 inch x 1.6 inch
This topside panel uses a phone-type connector, 8-wire, with 7ft cord.
This topside panel is also a replacement option for the following topside panels (Verify Button Layout): 53280, MAS25, 52361, 407012 Topside Panel with Overlay 407016, 407014, 52267-01 (No Overlay; Verify Button Layout), 163742 (No Overlay; Verify Button Layout), 55472 (Clear Trim, No Overlay; Verify Button Layout), 55654 (10ft Cable, No Overlay, Verify Button Layout)
NOTE: A standard Mini Oval Topside Panel (an overlay may already be applied) and a separate 11393 4-Button Overlay will be provided.
This item comes with a 1-year limited warranty.
If a longer cord is needed, Click here to see available extension cords.
NOTE: Depending on availability, the Overlay/Label may ship with a different color, text, and/or button shape than the picture shown above.
When selecting your spa topside panel, it’s critical that you go by part numbers and not just by appearances or the model number. The part number on a spa topside panel can be found on a white sticker located directly under the topside panel (The ID label may be located on the casing of the topside panel, and the topside panel may need to be removed from the hot tub to get to this label). Buy based on this part number. Model numbers may provide many different options, and choosing the correct option is very critical. Do NOT purchase a hot tub topside panel just because it looks the same as the one you’re replacing. Spa topside panels can look identical, but be programmed differently to work with different spa controllers and circuit boards. ALSO pay attention to the type of cable plug that is on the end of the topside cable. Different spa topside panels use a certain type of cable plug that plugs into compatible spa controllers and circuit boards. Replacement spa topside panels are shipped in clear sealed bags with Yellow Warning Label. Verify through the clear sealed bag that the correct topside panel was received prior to opening the bag. Sealed bags that are opened voids the return policy for spa topside panels.