Balboa Topside Kit, Serial Standard, VL702S, 54652

Balboa Topside Kit, 7-Button Serial Standard, VL702S model with LCD display. OEM part number 54652-01. This topside panel works with Balboa VS510SZ and VS520SZ spa controllers.

SpaGuts P/N: 30-200-4652

Button Configuration: 7-Button; (Top Row) Blower-Mode-Warm; (Bottom Row) Jet1-Jet2-Light-Cool

This topside panel uses an 8-wire phone-type RJ45 plug with 7ft cord.

Topside Dimension (approx): 10.3 inch x 4.6 inch

This topside also replaces the following Balboa Topside Panels: 54539-01 or 3-00-8062 (Topside with no overlay. Verify button configuration), 58-138-1064

NOTE: A standard 54539-01 topside (Panel Balboa VL702S No O/L) with 11790 overlay will be provided in a clear sealed bag.

This item comes with a 1-year limited warranty.

NOTE: Depending on availability, the Overlay/Label may ship with a different color, text, and/or button shape than the picture shown above.

When selecting your spa topside panel, it’s critical that you go by part numbers and not just by appearances or the model number. The part number on a spa topside panel can be found on a white sticker located directly under the topside panel (The ID label may be located on the casing of the topside panel, and the topside panel may need to be removed from the hot tub to get to this label). Buy based on this part number. Model numbers may provide many different options, and choosing the correct option is very critical. Do NOT purchase a hot tub topside panel just because it looks the same as the one you’re replacing. Spa topside panels can look identical, but be programmed differently to work with different spa controllers and circuit boards. ALSO pay attention to the type of cable plug that is on the end of the topside cable. Different spa topside panels use a certain type of cable plug that plugs into compatible spa controllers and circuit boards. Replacement spa topside panels are shipped in clear sealed bags with Yellow Warning Label. Verify through the clear sealed bag that the correct topside panel was received prior to opening the bag. Sealed bags that are opened voids the return policy for spa topside panels.