Balboa Topside Panel, 1-Button Auxiliary, Jets3, 55533

Balboa Topside Panel, 1-Button Auxiliary, Model AX10A3 J3(1) with Jets3 Overlay. OEM part number 55533. This topside comes with an 18ft cord with 6-pin Molex Plug.

SpaGuts P/N: 30-175-5533

Topside Dimension (Approx): 2.2 inch H x 2.2 inch Diameter (Requires 1.25 inch hole)

This topside panel is compatible with the following Balboa Controllers: BP501G3, BP7, BP2000

NOTE 1:  A standard AX10A3 topside panel (an overlay may already be applied) and a separate Jet-3 overlay will be provided in a clear sealed bag.

This topside panel is also a replacement option for the following topside panels: Balboa AX10A3, Balboa 55533, Balboa 52805 (Aux Panel Only), Balboa G8913 (Aux Panel Only), 34-55533-K, Balboa 12106 (Jet Overlay Only), 58-138-1226 (Jet Overlay Only), 58-138-3395 (Aux Panel Only), 58-138-1402 (Aux Panel Only)

This item comes with a one year limited warranty, and is NON-Returnable.

NOTE 2: Depending on availability, the Overlay/Label may ship with a different color, text, and/or button shape than the picture shown above.

NOTE 3: This Auxiliary Button Switch can also be used for an Air Blower depending on the Program Setup on the BP System. 

When selecting your spa topside panel, it’s critical that you go by part numbers and not just by appearances or the model number. The part number on a spa topside panel can be found on a white sticker located directly under the topside panel (The ID label may be located on the casing of the topside panel, and the topside panel may need to be removed from the hot tub to get to this label). Buy based on this part number. Model numbers may provide many different options, and choosing the correct option is very critical. Do NOT purchase a hot tub topside panel just because it looks the same as the one you’re replacing. Spa topside panels can look identical, but be programmed differently to work with different spa controllers and circuit boards. ALSO pay attention to the type of cable plug that is on the end of the topside cable. Different spa topside panels use a certain type of cable plug that plugs into compatible spa controllers and circuit boards. Replacement spa topside panels are shipped in clear sealed bags with Yellow Warning Label. Verify through the clear sealed bag that the correct topside panel was received prior to opening the bag. Sealed bags that are opened voids the return policy for spa topside panels.