Balboa VS500Z Spa Control System, 5.5KW HTR, (No Topside/Cords)

This Replacement Balboa VS500Z Model Spa Control System is field configurable. Internal component circuits can be setup to work with your existing pump and ozone.

OPTION 1: SEE LINK TO THE 303A SPAGUTS VS300Z SPA CONTROLLER KIT AS THE ALTERNATIVE REPLACEMENT OPTION (*IF THERE IS NO SMALL CIRCULATION PUMP).

SpaGuts P/N:  11-200-4368

This controller operates on 110/220V (220V requires 4-wire service).  The VS500Z controller is equipped with M7 technology which allows the heater to be mounted either on the suction or discharge side of the pump.

Features:

• One pump circuit, two speeds, 110/220V, 12A Max
• Circ Pump circuit, 110/220V, 4A Max (24Hr when activated, Requires 25 GPM)
• Ozone circuit, 110/220V, 1A Max
• Audio/Video circuit, 110/220V, 2A Max (Constant Voltage)
• 12V 12W Light Circuit
• 1.4/5.5KW, 120/240V Flo-Thru Incoloy High Flow heater with M7 technology
• Stainless steel heater housing
• No Pressure Switch. Heater can be installed on suction or discharge side of pump
• UL Recognized for your safety
• Freeze protection
• High-limit protection
• Filtration mode
• Economy Mode
• Pair of 2.0 inch Heater Tailpieces with O-Ring Gaskets
• 1-Year Limited Warranty

Controller Dimensions are 12 inch L x 11 inch H x 4.5 inch W (approx.)

Heater Dimensions are 15 inch L x 2.0 inch Diameter (approx.)

This control system is also a replacement option for the following part numbers: 54368-04, 11-175-4368, 54219-Z (Kit), 54368hc1vs500z, 54368-01, 54368HC3, 54368HC2, 54368HC1, 51-54368-Z-K, 3-70-0927HQ, 3-70-0823, CS6100B-U-WP, 58-138-2056, 55263-02 (VS612R1 System), 53551 or GVS500R1A (New System will Not support Silent Sentry Lights), Leisure Bay VH-V120R-CCAJ System (Re-plumbing Required to New Heater; Possible Topside Retrofitting), Premium Leisure 55940 System or 55941 Board (Chip PVS500ZR1A), EP6500, 50-54219-Z, EP6551, 54369-03 (circuit board)