Balboa VS501Z Spa Control System, 5.5KW HTR, No Topside/Cords (SEE REPLACEMENT LINKS BELOW)

Out of stock
Discontinued
SKU
11-200-4356
$0.00

THIS ITEM IS NO LONGER AVAILABLE. IT HAS BECOME OBSOLETED BY THE MANUFACTURER. PLEASE SEE BELOW ALTERNATIVE REPLACEMENT OPTIONS TO RETROFIT:

OPTION 1:  SEE LINK TO THE 403A SPAGUTS SGBP100 SPA CONTROLLER KIT TP500 WITH FIXED HEATER AS AN ALTERNATIVE REPLACEMENT OPTION TO RETROFIT.

OPTION 2:  SEE LINK TO THE 404A SPAGUTS SGBP100 SPA CONTROLLER KIT TP200T WITH FIXED HEATER AS AN ALTERNATIVE REPLACEMENT OPTION TO RETROFIT.

OPTION 3:  SEE LINK TO THE 413A BALBOA BP100G2 SPA CONTROLLER KIT WITH FIXED HEATER AS AN ALTERNATIVE REPLACEMENT OPTION TO RETROFIT.

OPTION 4:  SEE LINK TO THE 11-175-6412 BALBOA BP100G2 SPA CONTROLLER KIT WITH REMOTE HEATER AS AN ALTERNATIVE REPLACEMENT OPTION TO RETROFIT.

The Balboa VS501Z Spa Control System with 5.5KW Heater is field configurable. Internal component circuits can be setup to work with your existing pump, blower and ozone.

SpaGuts P/N: 11-200-4356

This controller operates on 110/220V (220V requires 4-wire service). The VS501Z controller is equipped with M7 technology which allows the heater to be mounted either on the suction or discharge side of the pump.

Features:

  • Pump 1 Circuit, 2-speed, 110/220V, 12A Max
  • Blower or Pump 2 Circuit, 1-speed, 110/220V, 10A Max
  • Circ Pump Circuit, 110/220V, 4A Max (24Hr when activated, Requires 25 GPM)
  • Ozone circuit, 110/220V, 1A Max
  • Audio/Video circuit, 110/220V, 2A Max (Constant Circuit)
  • Light Circuit, 12W, 1A Max
  • 1.375/5.5KW, 120/240V Flo-Thru Incoloy High Flow Heater with M7 Technology
  • Stainless Steel Heater Housing
  • Pair of 2.0 inch Heater Tailpieces with O-Ring Gaskets
  • No Pressure Switch. Heater can be installed on suction or discharge side of pump
  • UL Recognized for your safety
  • Freeze protection
  • High-limit protection
  • Filtration mode
  • Economy Mode
  • 1-Year Limited Warranty (Extended Warranty Option is available upon ordering)

Controller Dimensions are 12 inch L x 11 inch H x 4.5 inch W (approx)

Heater Dimensions are 15 inch L x 2.0 inch Diameter (approx)

Compatible Balboa Topside Panels: 52144 (VL200), 53850 (VL404), 52312 (VL200), 55050 (VL260), 53645 (VL260), 55559 (VL260), 54754 (VL260), 55049 (VL260), 55051 (VL260), 53566 (VL260), 53777 (VL260), 51223 (VL404), 51248 (VL404), 53646 (VL240), 53565 (VL240), 55129 (VL400), 50176 (VL400), 54094 (VL401), 54251 (VL401), 54107 (VL402), 54093 (VL402), 54104 (VL403), 51676 (VL403), 55349 (VL406T), 55570 (VL406T)

This controller system is also a replacement option for the following part numbers: G5152, 54379-03 (4.0KW), 54356-03, 53267, 54356hc1vs501z, 55860, EP6551-2, 51-54356-Z, G4152 (4.0KW), 11-175-4356

Write Your Own Review
You're reviewing:Balboa VS501Z Spa Control System, 5.5KW HTR, No Topside/Cords (SEE REPLACEMENT LINKS BELOW)
Your Rating
We found other products you might like!
Contact Us