Balboa VS520SZ Control System, 5.5KW, (NO Topside or Cords)

ALSO SEE THE FOLLOWING AS ALTERNATIVE REPLACEMENT OPTION:

OPTION 1: SEE LINK TO THE 11-175-4895 SPAGUTS SGVS520SZ SPA CONTROL SYSTEM WITH BETTER PRICING, BETTER WARRANTY, AND ALSO MADE BY BALBOA.

Replacement Balboa Spa Control System, Model VS520SZ, with cords.  Works with your existing pumps, blower and ozone. Field configuration, wiring and setup is required. (Topside Panel, Cover Plate, Cords and Cables are sold separately).

SpaGuts P/N: 11-200-6010

This control system operates on 220V (requires 4-wire service). The VS520SZ controller is equipped with M7 technology which allows the heater to be mounted either on the suction or discharge side of the pump.

Features:

• Pump 1 circuit, two speed, 110/220V, 12A Max
• Pump 2 circuit, two speed, 110/220V, 12A Max
• Blower or pump 3 circuit, one speed, 110/220V, 10A Max
• Ozone circuit, 110/220V, 1A Max
• 12V Light circuit, 12W
• 5.5KW, 220V flo-thru incoloy High Flow heater with M7 technology
• Stainless steel heater housing
• No Pressure Switch. Heater can be installed on suction or discharge side of pump
• UL Recognized for your safety
• Freeze protection
• High-limit protection
• Filtration mode
• Economy Mode
• Pair of 2 inch Heater Tailpieces with O-Ring Gaskets
• 1-Year Limited Warranty (Extended Warranty Option is available upon ordering)

Dimensions (Approx):

• Controller Dimensions (Approx): 12 inch L x 11 inch H x 4.5 inch W
• Heater Dimensions (Approx): 15 inch L x 2.0 inch Diameter (Hole Diameter is Actually 2.25 inches)

This control system is compatible with the following topside panels (Sold Separately): 53189, 54112-01 (No Overlay), 54652, 53811

This control system is also a replacement option for the following Balboa control system part numbers: 56007HC3, 56224, 56406 (VS520DZ), 51-56007-Z-K, 11-175-6010