Balboa VS520SZ Spa Controller Kit w/ Topside, 5.5KW HTR, 56007HC1-53189 (SEE REPLACEMENT BELOW)

The Balboa Spa Controller VS520SZ Kit is Field Configurable. Internal component circuits can be field setup by your installer to work with your existing pumps, blower and ozone.

THIS ITEM IS NO LONGER AVAILABLE. IT HAS BECOME OBSOLETED BY THE MANUFACTURER. PLEASE SEE LINKS BELOW TO ALTERNATIVE REPLACEMENT OPTIONS. YOU MAY ALSO CONTACT US IF YOU NEED HELP TO DETERMINE ALTERNATIVE REPLACEMENTS.

OPTION 1:  SEE LINK TO THE 11-200-6407 BALBOA VS520DZ SPA CONTROLLER KIT WITH VL801D TOPSIDE AS AN ALTERNATIVE REPLACEMENT OPTION.  

OPTION 2:  SEE LINK TO THE 405A SPAGUTS SGBP7 SPA CONTROLLER KIT WITH TP600 TOPSIDE AS AN ALTERNATIVE REPLACEMENT OPTION TO RETROFIT.  

OPTION 3:  SEE LINK TO THE 427A SPAGUTS SGBP7 SPA CONTROLLER KIT WITH TP500 TOPSIDE AS AN ALTERNATIVE REPLACEMENT OPTION TO RETROFIT.

OPTION 4:  SEE LINK TO THE 11-200-5356 BALBOA BP7 SPA CONTROLLER KIT WITH TP600 TOPSIDE AS AN ALTERNATIVE REPLACEMENT OPTION TO RETROFIT.

OPTION 5:  SEE LINK TO THE 419A BALBOA BP7 SPA CONTROLLER KIT WITH TP700 TOPSIDE AS AN ALTERNATIVE REPLACEMENT OPTION TO RETROFIT.

SpaGuts P/N: 249A

This controller operates on 220V (requires 4-wire service). The VS520SZ controller is equipped with M7 technology which allows the heater to be mounted either on the suction or discharge side of the pump.

Kit Includes:

• Balboa VS520SZ Control System, 56007-01
• Balboa Serial Standard Topside Panel (No Overlay), 54112-01
• Balboa Topside Overlay, Serial Standard, 7-Button, 10430
• Topside Cover Plate, 10165B
• Pair of 2 inch Heater Tailpieces with O-Ring Gaskets
• Two Dual Speed Amp Cords, 4-Wire, 48 inch
• Two Single Speed Amp Cords, 3-Wire, 48 inch
• Light Cable Harness with Socket, 2-Pin Amp Plug, 8ft
• Light Bulb, Clear, 12W
• 1-Year Limited Warranty

Features:

• Pump 1 circuit, two speed, 110/220V, 12A Max
• Pump 2 circuit, two speed, 110/220V, 12A Max
• Blower or pump 3 circuit, one speed, 110/220V, 10A Max
• Circ Pump circuit, 110/220V, 4A Max (24Hr when activated, Requires 25 GPM)
• Ozone circuit, 110/220V, 1A Max
• 12V Light Circuit
• 5.5KW, 220V flo-thru incoloy High Flow heater with M7 technology
• Stainless steel heater housing
• No Pressure Switch. Heater can be installed on suction or
  discharge side of pump
• UL Recognized for your safety
• Freeze protection
• High-limit protection
• Filtration mode
• Economy Mode
• 1-Year Limited Warranty (Extended Warranty Option is available upon ordering)

Controller Dimensions (Approx): 12 inch L x 11 inch H x 4.5 inch W

Heater Dimensions (Approx): 15 inch L x 2 inch Diameter

Topside Panel Dimensions (Approx): 7.25 inch L x 3.25 inch W

Topside Cover Plate Dimensions (Approx): 8.5 inch L x 4.0 inch W

This controller kit is also a replacement option for the following Balboa control system part numbers: 56007HC1, 56007, 56224, 56406 (VS520DZ), 10-201-6007

Accessorry Bag Contents: