Board and Topside Kit, Dimension One Spas Retro-Kit, D1RETRO83 (SEE REPLACEMENT BELOW)

Balboa Circuit Board and Topside Combo Kit to replace the older version circuit board and topside panel on a Dimension One Spa. OEM part number D1RETRO83.

THIS ITEM IS NO LONGER AVAILABLE, IT HAS BEEN DISCONTINUED BY THE MANUFACTURER. PLEASE CONSIDER A NEW SPA CONTROLLER KIT AS AN ALTERNATIVE REPLACEMENT OPTION FOR RETROFITTING. CONTACT US IF YOU WOULD LIKE HELP TO DETERMINE A REPLACEMENT SPA CONTROLLER KIT. 

SpaGuts P/N: 10-710-0083

This Retro-Kit uses a similar Balboa circuit board that replaces the old obsoleted 51483 topside panel, and will fit in the existing control box for quick and easy swap. The replacement topside panel will fit in the existing topside hole cut-out. Detailed Installation instructions are also provided.

NOTE: If needed, the 30337 Sensor Assembly, Cables, Component Cords and the 30270-2 Transformer are sold separately.

BOARD FEATURES:

• Pump 1 Circuit, 2-Speed, 110/220V, 15A
• Pump 2 Circuit, 2-Speed, 110/220V, 15A
• Optional Blower or Pump 3 Circuit, 1-Speed, 110/220V, 15A
• Circ Pump Circuit, 110/220V, 5A
• Ozone Circuit, 110/220V, 5A
• 12V Light or 110V Fiber Optic Circuit

This circuit board and topside kit is a replacement option for the following Dimension One Spa model and year (SEE NOTES For Changes in Features):
Aurora II, 1998, 1999 Up To Serial # 63891;
California, 1998, 1999 Up To Serial # 63863;
Chairman, 1997;
Chairman, 1998, 1999 Up To Serial # 63869;
Chairman II, 1999 Up To Serial # 64315;
Diplomat, 1997, 1998, 1999 Up To Serial # 63872;
Luxxor; 1997;
Nautilus, 1998, 1999 Up To Serial # 64003;
Sedona, 1997;

This item comes with a 1 year limited warranty.

When selecting your spa circuit board, it’s critical that you go by part numbers and not appearances or the model number. The part number on a spa circuit board can be found on a white sticker located directly on the circuit board (The ID label may be located on the board relays or on the transformer). Buy based on this part number. Model numbers of a circuit board may provide many different options and/or lead to ordering the wrong part. Do NOT purchase a hot tub circuit board just because it looks the same as the one you’re replacing and have a similar model number. Spa circuit boards can look identical, but be programmed differently to work with different spa controllers and topside panels. NOTE that most circuit boards need to be configured in the field to work with the existing spa components and power ratings, and a licensed professional is recommended for installation and configurations. If this circuit board is being used as an optional replacement for the original circuit board, please follow the new circuit board wiring diagram for proper installation and configuration setup.

CIRCUIT BOARD PURCHASE AGREEMENT: Manufacturer's Warranty DOES NOT cover burnt terminal blocks or connections, burnt traces or terminals for circuit board purchases. These are normally caused by field installation errors, loose connections and/or over current draw from external electrical wiring and/or components. This warranty agreement applies to ALL orders made over the phone, online orders, and through purchase orders.