CG Air Bath Control w/Topside Kit, IC-TMSPV-120/60-020-N-N-WD1, CG-TMS3-KRCC03-CP (OBSOLETE)

THIS ITEM IS NO LONGER AVAILABLE. IT HAS BECOME OBSOLETED BY THE MANUFACTURER. CONTACT US IF YOU NEED HELP TO DETERMINE A COMPATIBLE REPLACEMENT OR IF YOU ARE INTERESTED IN RETROFITTING A SPA CONTROLLER KIT.

CG Air Bath Control with Topside Kit.  This kit includes the TMSPV Module, OEM part number IC-TMSPV-120/60-020-N-N-WD1, with 20-minute time out.  This item comes with a 2ft power cord with Nema plug that plugs into a wall outlet, and a 2ft cord with female Nema receptacle to plug into an air blower or a bath pump cord (Bath Pump MUST be Variable Speed).

The control unit operates via a 3-Button Round Topside Keypad, included in kit, that comes with an 8ft cable, OEM part number CG-TMS3-KRCC03-CP, Model TMS.  This topside keypad has an on/off button, speed steps controls, and pulse modes. Once activated, the air blower or bath pump will run for 20 minutes, then automatically shut off.  Press the button again for 20 more minutes of operation.

SpaGuts P/N:  11-200-0020

Power Rating:  120V 60Hz 15A

Control Unit Dimensions (Approx):  5.0 inch x 4.25 inch x 2.0 inch

Topside Keypad Dimensions (Approx):  1.875 inch in Diameter

Add this control unit to ensure that your bathtub air blower or variable speed bath pump is not left running whennot in use.  We recommend adding a controller in situations where the bathtub is likely to be usedby careless users, such as in hotels.

Water Level Sensor:  Included, with 2 Screws and Washers to mount on plumbing.  This is to ensure an adequate water level before allowing the air blower or variable speed pump to run, to prevent damage from water sprayed into the air by the bathtub jets.  Cable is approximately 5ft.  (NOTE: If not using this water level sensor, the 2 sensor wires MUST be connected together from the Pink Quick Connectors on the sensor cable)

This controller is for indoor use only.  Wall mount.  Hard wiring may be required.

This bath control kit is also a replacement option for the following bath controls:  DTHHD2 or 9920-400114 (Light Circuit is not available with new unit), 0102-001006, 0102-006005, DTHLD2, SW-DTH, SW-DTHL, SW-DTHH, 30-720-1006, 910832-001 (Button Switch), 910830-001 (Control Module), 58-337-1160 (Button Switch), 9736-001 (Button Switch), 58-337-1165 (Control Module), 9736-002 (Control Module), AS-120P Control Module, 0108-205005 (Control), 10-200-5005 (Control Kit), 0108-001006 (Keypad), model SW-AS Keypad, 3-70-0828 (Control), 3-00-8070 (Round Button Keypad)

This item comes with a 1-year limited warranty.