EZ Install Plumbing Kit

In stock
In stock

Make installing your spa pack, spa controller and pump as quick and simple as possible. This plumbing kit is especially useful if your spa is plumbed with hard rigid PVC or if it is plumbed with flex hose that does not have enough length plus 6 inches to spare to reach your spa pack, controller or pump.

SpaGuts P/N:

  • 40-200-1085, 1.5" Plumbing Kit
  • 40-200-1090, 2.0" Plumbing Kit

Professional installers carry with them all the parts we include in our EZ Install Kit. During installation they cut back the hard PVC or flex hose leading up to the spa pack. Then using couplers they attach new flex hose between the existing plumbing and the spa pack's screw-on unions. This allows for plumbing with as few bends and elbows as possible, as each turn in the plumbing leads to reduced water pressure and decreased performance.

While some of the pieces in the EZ Install Kit may look ordinary, most fittings are not available at your local home improvement store and must be purchased at a specialty spa store. Do not get stuck in the middle of installation for lack of a basic part. Get the Spa Guts EZ Install Plumbing Kit!

This kit comes in 1.5-inch and 2-inch plumbing versions and includes the following:

  • Two 30 inch pieces of flex hose
  • PVC Glue
  • Two Street 90's
  • Two Standard 90's
  • Two PVC Couplings

This item comes with a 90 day limited warranty, and is NON-Returnable.


Write Your Own Review
You're reviewing:EZ Install Plumbing Kit
Your Rating
Contact Us