Gecko Air Streme Bath Control w/Topside Kit, AS-120P, SW-AS, 20 mins (SEE REPLACEMENT BELOW)

Out of stock
Discontinued
SKU
10-200-5005
$0.00

Gecko AirStreme Bath Control with Topside Kit. This kit includes the AS-120P Module, OEM part number 0108-205005, with 20 minute time out. This item comes with a 3ft power cord with Nema plug that plugs into a wall outlet, and a short cord with female Nema receptacle to plug into an air blower cord (Does not work with a pump).

THIS ITEM IS NO LONGER AVAILABLE. IT HAS BECOME OBSOLETED BY THE MANUFACTURER. SEE OPTIONS BELOW:

1) If you still have a working Gecko Topside Panel, SW-AS, 4-BTN, 0108-001006 you may contact to order JUST the 10-720-5005 Gecko Air Streme Control Module, AS-120P, 20min, 120V 15A, 3Ft Nema, 0108-205005.

2) If you MUST have Both the Topside Panel and Variable Speed Control, contact SpaGuts for pricing on the Alternative Replacement CG AIR Variable Speed Bath Control Kit.

The control unit operates via a 4-Button Topside Keypad, included in kit, that comes with a 6ft cable, OEM part number 0108-001006, model SW-AS. This topside keypad has an on/off button, 64 speed steps controls, pulse and wave modes, and the air blower will run for 20 minutes, then automatically shut off. Press the button again for 20 more minutes of operation.

SpaGuts P/N: 10-200-5005

Power Rating: 120V 60Hz 15A

Control Unit Dimensions (Approx): 5.72" L x 3.88" W x 3.81" H

Topside Keypad Dimensions (Approx): 3.25" L x 1.72" W x 0.28" H

Add this control unit to ensure that your bathtub air blower is not left running whennot in use. We recommend adding a controller in situations where the bathtub is likely to be usedby careless users, such as in hotels.

You can also add to this controller the optional bathtub water level sensor (Gecko brand ONLY) toensure an adequate water level before allowing the air blower to run, to prevent damage from watersprayed into the air by the bathtub jets.

This controller is for indoor use only. Wall mount. Hard wiring may be required.

This bath control kit is also a replacement option for the following bath controls: DTHHD2 or 9920-400114 (Light Circuit is not available with new unit), 0102-001006, 0102-006005, DTHLD2, SW-DTH, SW-DTHL, SW-DTHH, 30-720-1006, 910832-001 (Button Switch), 910830-001 (Control Module), 58-337-1160 (Button Switch), 9736-001 (Button Switch), 58-337-1165 (Control Module), 9736-002 (Control Module)

This item comes with a one year limited warranty.

Write Your Own Review
You're reviewing:Gecko Air Streme Bath Control w/Topside Kit, AS-120P, SW-AS, 20 mins (SEE REPLACEMENT BELOW)
Your Rating
Contact Us