Gecko Topside Kit, K-9, TSC-9-GE1-GE2, w/ 2 Overlays, BDLTSC9PPD (DISCONTINUED; SEE OPTIONS BELOW)

THIS KIT WITH TWO OVERLAYS IS NO LONGER AVAILABLE. CONTACT US IF YOU ARE INTERESTED IN THE SINGLE OVERLAY OPTION, AVAILABLE IN BOTH BUTTON CONFIGURATIONS. 

Replacement Gecko and Spa Builders Topside Panel, model K-9 or TSC-9-GE1-GE2, Option AD-NO, 4-Button, and 2 Overlays. OEM part numbers 3-00-7251A and BDLTSC9PPD. This topside comes with a 10ft cord that uses an 8-pin connector.

SpaGuts P/N: 30-720-0009

Topside Kit Includes (One of Each):

• Topside Panel, K9-AD-NO. OEM P/N 0202-007154
• (Overlay 1) Pump, Light, Up, Down. OEM P/N's 9916-100131 or 3-05-7099
• (Overlay 2) Pump1, Pump2, Light, Temp. OEM P/N's 9916-100186 or 3-05-7106

Topside Dimension (Approx): 4.45 inch x 1.96 inch

Replacement Option for the K-18, TSC-18, K-20 or TSC-20 Model Topsides, and the following part numbers: 3-00-7251, 34-0193 or ECO-1, 34-0200 or ECO-2, 58-355-4100, 58-355-4098, 58-355-4102 (Verify hole size for fitment, and button configuration to make sure they are laid out the same), 0202-007117, 3-00-7058, K-59 / TSC-59 (3-00-7187), 0202-007154B (Topside Only, No Overlay), 0202-007154A (Topside with 2-Pump Overlay)

This item comes with a one year limited warranty.

NOTE: Depending on availability, the Overlay/Label may ship with a different color, text, and/or button shape than the picture shown above.

When selecting your spa topside panel, it’s critical that you go by part numbers and not just by appearances or the model number. The part number on a spa topside panel can be found on a white sticker located directly under the topside panel (The ID label may be located on the casing of the topside panel, and the topside panel may need to be removed from the hot tub to get to this label). Buy based on this part number. Model numbers may provide many different options, and choosing the correct option is very critical. Do NOT purchase a hot tub topside panel just because it looks the same as the one you’re replacing. Spa topside panels can look identical, but be programmed differently to work with different spa controllers and circuit boards. ALSO pay attention to the type of cable plug that is on the end of the topside cable. Different spa topside panels use a certain type of cable plug that plugs into compatible spa controllers and circuit boards. Replacement spa topside panels are shipped in clear sealed bags with Yellow Warning Label. Verify through the clear sealed bag that the correct topside panel was received prior to opening the bag. Sealed bags that are opened voids the return policy for spa topside panels.