Hydro Quip Circuit Board, DIG MP, UNIV, 10-Key, 9700 Series, 33-0025A, 33-0027-K (SPECIAL ORDER)

Replacement Hydro Quip Circuit Board, Model Digital MP (M-Class), Universal for 9700 or M Series Controller. Software chip number is 606_02. OEM part numbers 33-0025A-R8, 33-0025A-K, 33-0027-K and 0201-100029. This circuit board is programmed for a 10-Key Topside Panel. Additional Field Programming Setup is Required.

SPECIAL ORDER NOTES: THIS ITEM IS A SPECIAL ORDER AND HAS AN ESTIMATED 2-10 BUSINESS DAYS LEAD TIME BEFORE SHIPPING. SPECIAL ORDERS ARE NON-RETURNABLE AND CANNOT BE CANCELED ONCE THE ORDER IS PLACED.

SpaGuts P/N: 10-150-0025

This circuit board is compatible with the (30-150-0190) K-5 10-Button and the (30-200-0191) K-5 8-Button Topside Panels (Field Programming Required), (25-150-2025) 10ft Temperature Sensor, (25-150-2026) 25ft Temperature Sensor, (25-150-0201) 18in Hi-Limit Sensor, (34-0201D-76) 72in Hi-Limit Sensor, and the (95-150-0099) Transformer.

This circuit board is also the replacement board for the HydroQuip M-Series Spa Controller with product number P4HYMWL-95W4QEZ and wiring diagram 4438, product number P4EPWBL-95W4QEZ and wiring diagram 4431, wiring diagram 6712, product number P4HHPMBS-42YVNEG or CS9800-U

This circuit board is also the replacement option for the following part numbers (Field Program Setup is Required): 33-0027-R1 or 33-0027-K (8000 Outdoor Series), 33-0026A-UR2, 3-64-7011, 33-0025A, 33-0025A-R1, 33-0025A-R2, 33-0025A-R3, 33-0025A-R4, 33-0025A-R5, 33-0025A-R6, 33-0025A-R7, 33-0025A-R8, 59-355-1101, HQ0003, 3-60-0058, CS9700 (Control System), CS9707 (Control System), 33-0025-R1, 33-0025-R2, 33-0025-R3, 33-0025-R4, 33-0025-R5, 33-0025-R6, 33-0025-R7, 33-0025-R8, 33-0025-K, 33-0027

NOTE: If using this circuit board (Revision 8) as a replacement for the older revision circuit board, it may also require replacing the transformer with correct plug, a compatible flow switch or pressure switch cable with correct plug, and the light cable with correct plug.

This item comes with a one year limited warranty.

When selecting your spa circuit board, it’s critical that you go by part numbers and not appearances or the model number. The part number on a spa circuit board can be found on a white sticker located directly on the circuit board (The ID label may be located on the board relays or on the transformer). Buy based on this part number. Model numbers of a circuit board may provide many different options and/or lead to ordering the wrong part. Do NOT purchase a hot tub circuit board just because it looks the same as the one you’re replacing and have a similar model number. Spa circuit boards can look identical, but be programmed differently to work with different spa controllers and topside panels. NOTE that most circuit boards need to be configured in the field to work with the existing spa components and power ratings, and a licensed professional is recommended for installation and configurations. If this circuit board is being used as an optional replacement for the original circuit board, please follow the new circuit board wiring diagram for proper installation and configuration setup.

CIRCUIT BOARD PURCHASE AGREEMENT: Manufacturer's Warranty DOES NOT cover burnt terminal blocks or connections, burnt or blown fuses, burnt traces or terminals for circuit board purchases. These are normally caused by field installation errors, loose connections and/or over current draw from external electrical wiring and/or components. This warranty agreement applies to ALL orders made over the phone, online orders, and through purchase orders.