Hydro Quip Outdoor Series Electronic Spa Controller Kit, Gecko, Wifi Enabled, 11KW, CS8900-A (SPECIAL ORDER, FINAL SALES)

Hydro Quip's outdoor rated electronic spa controller with IN.K8 Topside Panel, 11KW Heater, model CS8900-A, powered by Gecko Y-7, Wifi Enabled. This controller will operate up to 3 pumps and a blower, and provides fast HEAT. This controller is designed to be mounted outdoor in the elements and is housed in a weather tight metal box. The metal box is made of strong cold-rolled steel and triple powder coated for maximum protection.

*Field Configuration, Wiring and Programming Setup is Required by your installer.

SPECIAL ORDER NOTES: THIS ITEM IS A SPECIAL ORDER AND HAS AN ESTIMATED 10-20 BUSINESS DAYS LEAD TIME BEFORE SHIPPING. SPECIAL ORDERS ARE NON-RETURNABLE AND CANNOT BE CANCELED ONCE THE ORDER IS PLACED.

SpaGuts P/N: 11-150-8900

Electrical Rating:

• 220V 60Hz Single Phase
• 110/220V Component Circuits, 30-40A (40/50A Service Required)
• 220V 11KW Heater, 46A (Additional 60A Service Required)

Standard Features:

• Topside Panel, IN.K8 Model, 8-button with 10ft Cord
• Pump 1 and Pump 2 circuits up to 2 speeds, 110/220V, 15A Max
• Pump 3 circuit, Single Speed, 110/220V, 15A Max
• Blower circuit, Single Speed, 110/220V, 15A Max
• Ozone circuit 110/220V, 2A Max
• Light circuit, 12V or 120V, 1A Max
• Freeze Control
• Hi-Limit Control
• Economy Mode
• Smart Winter Mode
• Timed Filtration
• Reminder Messages
• Stainless Steel Heater Housing with 11KW Titanium Heater Element, 220V, 46A (requires 25 GPM Water Flow)
• Triple Powder Coated metal housing that prevents rust
• 2 Year Manufacturer's Limited Warranty

Special Features:

• Advanced electronics!
• In.put - New Input Terminal Bloc - In.put was designed to ease wire insertion (up to # 4 AWG) and connections. Tighter input connection reduces heat generated for increased component lifetime.
• In.stik - Automated Software Upload - In.stik a pen drive with an in.link connector very similar to a USB memory stick. It connects to the CY System and contains data to program or configure its system. The Y-7 Series System executes the data upload automatically.
• Flow Switch Protected - Water flow is monitored by the flow switch to help prevent the heater element from overheating.
• Field-Serviceable Parts - The Y-7 Series provides easy access to the controller board for all maintenance and replacement requirements. Each component circuit can also be field configured from 110V to 220V, or from 220V to 110V.
• UL and CUL Listed for your safety

Auxiliary Topside Panel (Sold Separately):

• IN.K120-3OP Auxiliary Topside Panel, 0607-005019

Add the optional IN.K120-3OP Auxiliary Topside Panel for additional control from the other side of the spa! Controls up to 3 pumps, and a light. It comes with a 20ft cable, and plugs into one of the CO ports on the main circuit board.

WIFI Optional (Sold Separately):

• iPhone App! Control your spa from your iPhone, iPad, or iPod!

Add the optional IN.TOUCH 2 RF Interface Module, P/N 0608-521020, download one of the iPhone Apps, and use your iPhone, iPad, iPod or computer to control your Gecko IN.YE Controller remotely! Also works with Android! The Gecko IN.YE Controller we have in stock are pre-program with the software capable of WIFI control. Imagine the possibility of being able to monitor your spa and control it remotely within in your wifi network with the Home App, or do it all remotely from across country with the World App using the internet. The wifi App also allows you to set all your Economy and Filtration Cycles through your phone (iPod, iPad or computer), with precision that goes to the minutes! Basically Amazing!!!

• (*iPhone, iPad, iPod and computer are not included)

 Controller Dimension (Approx): 15.5 inch H x 19.5 inch W x 6 inch D

Heater Dimension (Approx): 19.25 inch x 2.0 inch (2.25 inch hole diameter)

Topside Dimension (Approx): 7.0 inch L x 3.25 inch W

This controller is also a replacement option for the following part numbers: Hydro Quip CS8600 Series, , 33-0027R1, 3-80-0300, K3GPQ0A-220W4LO

NOTE1: COMPONENT CORDS ARE NOT INCLUDED. FOR SPA COMPONENTS WIRING, "UL" REQUIRES A LICENSED ELECTRICIAN TO RUN ELECTRICAL LINES THROUGH OUTDOOR APPROVED CONDUITS TO BE HARD WIRED INTO THE CONTROLLER.

NOTE2: THIS CONTROLLER IS NOT CONFIGURED TO HANDLE A SWIM SPA PUMP THAT IS RATED MORE THAN 15A 220V. PLEASE CONTACT SPAGUTS SALES FOR MORE INFORMATION IF INTERESTED IN A CONTROLLER FOR HIGHER AMPERAGE SWIM SPA PUMPS.

NOTE3: If a controller is needed with a Fireman Switch to activate a Gas Heater or a 5.5KW Heater, contact us for pricing of the model CS8900-C or CS8900-B.

Related Part Numbers: