LX Spa Circulation Pump, 1/15HP, 110/220V, 1-SPD, SD, 1.5-inch, 10-48WTC0153

Replacement LX Spa Circulation Pump by Guangdong Lingxiao, 48WTC Series. Rated 1/15 Horse Power (HP), 110/220V, single speed, 48-Frame. OEM part numbers 10-48WTC0153 and 48WTC0153C-1.

SpaGuts P/N: 15-973-0153

Pump and Motor Ratings

• Horse Power: 1/15 HP
• Voltage*: 115V and 230V (See Wiring Diagram)
• Amps*: 1.6 (115V) / 0.7A (230V
• Frequency: 60Hz
• RPM: 2100
• 1.5-inch Center Suction
• 1.5-inch Side Discharge
• Automatic Overload Protection
• Capacities (Approx): up to 40 GPM
• Max Head: 10.5 ft
• Max Pressure: 50 PSI
• Max Temp: 140° F
• 1-year manufacturer's limited warranty

Application:

• Spas and Hot tubs water circulation
• Saltwater and Freshwater
• Ozone Treatment
• Liquid Transfer

Dimensions (Approx): 12.5 inches long, 8.25 inches high, 6.83 inches wide.

*NOTE 1:  This pump can be wired for 110V or 220V application. The image above showing the wiring diagram consist of two wiring options. For 110V motor voltage, follow the LOW VOLTAGE wiring configuration that requires connecting the BROWN internal motor wire to terminal 2, and the BLUE internal motor wire to terminal 1. For 220V motor voltage, follow the HIGH VOLTAGE wiring configuration that requires connecting the BROWN internal motor wire to terminal 3, and the BLUE internal motor wire to terminal 2.

*NOTE 2:  Amp rating and dimensions may vary depending on the motor brand and model that is used with this pump. Motor brand can be US Motors, AO Smith Century Laser, GE, Etc… Please contact us to verify dimensions if space is very limited for the new pump.

This is a 24 hour circulation pump, with 48-frame motor, and a side discharge wet end. Delivers 40 gpm to maintain strong water flow, and has a viton seal for maximum leak protection. Compatible with Spaguts controllers and many other brand controllers.

Threaded fittings are standard 1.5 inch (approximately 2-3/8 inch if measuring from outside thread to outside thread of fittings). Pump Unions are sold separately.

This pump is also a replacement option for the following part numbers: 02093000-2 (Aqua-Flo Circ-Master CMHP), 02093636-2, 02093635-2, 02093460-2, 02093000-1010, 02093641-2000, 02093005-2, 02410005-2, 10-0110, 3410030-1E77 (Leaf Trap 6ft NEMA Cord), 34-270-1050, 1-00-0182, 3410030-1E (Waterway Iron Might), 341003A-1E (Iron Might), 15-720-0021, 02093001-2 (Aquaflo Circ Master CMHP), 3410020-1E (Obsolete - Iron Might), 02093006-2, 10-0110A, 02093007-2 (Hush Pump), 02410512-2 (TheraMaxII), 02407004-2, 02093670-2, 15-720-0022,  341002A-1E (Iron Might), 1-00-0183, 34-270-1055, CP-1/8-1N22A, 3J10070-0E, PUMCIRC-48F1S240V, PUUL08138H (Obsolete), LX WTC50M (Re-Plumbing is Required), 5KH39BNA770X (Motor Only), 3J10070-1E, 02093001-2010 or 1-00-0204, 15-350-2256, 02093000-2010 or 1-00-0154 (Aqua Flo CircMaster CMHP), 02410362-2, 02093430-2, X321790, X321810, X321793, 02097616-1 M-HK2R001, 02093641-2, 02093645-2, 02093637-2, 15-350-2255

Motor part numbers that are normally used for this pump: K55MYGJN-8255, K55MYGRD-8367, 9352-9303-A, K55MYHFR-8633, F48P83A79

The pump image shows the pump discharge on top pointing to the 12 o'clock position. The pump discharge can also be rotated every 90-degrees (3, 6 or 9 o'clock positions) by loosening the four long bolts at the back of the motor. The pump intake (suction) is located in the front center face of the pump.