Portable Baptismal Equipment System, 1.0KW 110V, GFCI, 110V Pump, PBES6010 (SPECIAL ORDER)

Portable Baptistry or Baptismal Equipment System for use on small baptismal pools.  It consist of a 1.0KW 110V Flo-Thru Heater, an adjustable thermostat, a hi-limit, pressure switch, contactors, includes a 15 feet corded 15A 110V GFCI, 15ft hoses and a submersible pump.  Indoor Rated System.  OEM Part number PBES6010.

SPECIAL ORDER NOTES:  THIS ITEM IS A SPECIAL ORDER AND HAS AN ESTIMATED 5-30 BUSINESS DAYS LEAD TIME BEFORE SHIPPING.  SPECIAL ORDERS ARE NON-RETURNABLE AND CANNOT BE CANCELED ONCE THE ORDER IS PLACED. 

SpaGuts P/N:  10-150-6011

Feature:

• Single Phase, 110V, 50/60Hz
• Corded GFCI, 110V 15A, 15ft
• 1.0KW 110V Flo-Thru Heater Assembly
• Stainless Steel Heater Housing
• Full Range Thermostat (59 to 104 °F)
• High Limit and Pressure Switch Protected
• 3/4-inch Hose Connections
• Heater "ON" Indicator Light
• Main Power On/Off Toggle Switch
• Nema Receptacle for Pump Cord
• "Paint-Lock" rust proof enclosure
• ABS Skid Base Mount
• 1/6 HP 110V Submersible Pump
• Two 3/4-inch Hoses, 15ft
• UL Recognized
• Owners Manual
• Wiring Diagram

Dimensions:

• Control Box (Approx):  13 inch L x 9.0 inch W x 12.5 inch H
• Heater Assembly (Approx):  13.25 inch L x 1.5 inch Diameter x 0.75 inch Threaded Hose Fittings
• Pump (Approx):  12 inch H x 6.0 inch Diameter

MOUNTING:  The heater unit must be mounted Vertically.  Avoid "Tilting" to help prevent air pockets inside the heater that causes heater to burn out.

NOTE:  The thermostat on the heater unit only controls the heater.  There is a constant 110V Outlet for the pump cord plug-in.  There is no switch to only turn the pump on/off.  Requires a pump to flow water through the heater with minimum 15 GPM, and minimum 3/4 inch plumbing.

This baptismal equipment system is also a replacement option for the following part numbers:  58-355-2160, 3-70-0920

This item comes with a 1-year manufacturer's limited warranty.