SpaGuts Brand EL2001 Mach 3 Spa Control System, No Topside or Cords, 5.5KW HTR, 59248 (SEE REPLACEMENTS BELOW)

SpaGuts EL2001 Mach 3 Spa Control System with 5.5KW 220V Heater. Topside Panel and Cords or Sold Separately. OEM part number 59248.

THIS ITEM IS NO LONGER AVAILABLE. IT HAS BECOME OBSOLETED BY THE MANUFACTURER. PLEASE SEE LINKS BELOW TO ALTERNATIVE REPLACEMENT OPTIONS THAT INCLUDES A TOPSIDE PANEL THAT MAY REQUIRE RETROFITTING: 

• 427A SpaGuts brand SGBP7 Spa Controller Kit w/ SGTP500 Topside, 5.5KW (NO FIBER OPTICS LIGHT OPTION)

• 405A SpaGuts brand SGBP7 Spa Controller Kit w/ SGTP600 Topside, 5.5KW (NO FIBER OPTICS LIGHT OPTION)

• 411A SpaGuts brand SGBP7 Spa Controller Kit w/ SGTP540 Topside, 5.5KW (NO FIBER OPTICS LIGHT OPTION)

• 407A SpaGuts brand SGBP7 Spa Controller Kit w/ SGTP700 Topside, 5.5KW (NO FIBER OPTICS LIGHT OPTION)

This control system operates on 220V 60Hz 4-Wire (Line 1, Line 2, Neutral and Ground). The SGEL2KM3 control system is equipped with M7 technology which allows the heater to be mounted either on the suction or discharge side of the pump. Field Configuration and Setup is required.

An option only available from SpaGuts, the SGEL2KM3 is available Factory Configured to your exact specifications for $39.95 or as a Retrofit Kit that is easily field configured at the time of installation. Competitors only offer controllers as a Retrofit "do it yourself kits" without the time saving Factory Configuration optionally available by SpaGuts. Factory Configuration includes set-up and bench testing of Internal component circuits to work with your existing pumps, blower (or pump 4), circulation pump and ozone, so you don't have to do any internal wiring, making your controller plug and play right out of the box. Best value for most installers; saves time and prevents costly installation errors.  Once the order is placed with the Factory Configuration Fee, we will contact you to collect information that is required to setup the controller.

SpaGuts P/N: 11-175-9248

Features: 

• Pump 1 circuit, two speed, 110/220V, 12A Max
• Pump 2 circuit, Single or Dual Speed, 110/220V, 12A Max (Dual Speed is only available if there is no blower)
• Pump 3 circuit, Single Speed, 110/220V, 12A Max
• Blower circuit, 1-speed, 110/220V, 8A Max (Available only if pump 2 is single speed)
• Circ Pump circuit, 110/220V, 4A Max (24Hr when activated, Requires 25 GPM. Available only if there is no Fiber Optics Light)
• Ozone circuit, 110/220V, 1A Max
• Audio/Video circuit, 110/220V, 2A Max (Constant Circuit)
• 12V Light circuit, OR 110V MoodEFX Light circuit, OR 110V FiberEFX Light circuit (2A Max)
• 5.5KW, 240V Flo-Thru Incoloy 800 High Flow heater with M7 technology
• Stainless steel heater housing
• No Pressure Switch. Heater can be installed on suction or discharge side of pump
• UL and ETL listed for your safety
• Freeze protection
• High-limit protection
• Filtration mode
• Economy Mode
• Persistent Memory
• Real Time Clock
• Pair of 2.0 inch Heater Tailpieces with O-Ring Gaskets
• Exclusive 2-Year Limited Warranty (Extended Warranty Option is available upon ordering)

This control system is compatible with the following Balboa topside panels (Sold Separately): 52654 ML900, 52649 ML700, 52684 ML400 Auxiliary, 55304 ML551, 53502 ML551, 55533 AX10

Controller Dimensions are (Approx) 12.5 inch L x 12 inch H x 4.5 inch W.

Heater Dimensions are (Approx) 15 inch L x 2.0 inch Diameter.

This control system is also a replacement option for the following control system part numbers: 54478-03, 53884-05, 10-175-3884, 55067-03, 3-70-0808, 55066-04, 58-138-2015, 58-138-2016, 53882-05, 53323

This control system is also a replacement option for the following circuit board: 59249, 54482-03, 53414