Call (714) 764-0013
SpaGuts brand Serial Standard Topside Panel, Model VL700S. OEM part number 50286-01. This topside panel uses a phone-type connector, 8-wire, with 10ft cable.
SpaGuts P/N: 30-175-0286
This is the replacement topside panel for the SpaGuts brand VS510SZ Spa Controller Kit 54802-01, System 56245-01 and Board 56459.
Button Configuration: 7-Button (Jet1, Jet2, Light, Blower, Mode, Warm, Cool)
Topside Panel Dimensions (Approx): 9.75 inch L x 3.125 inch W
This topside panel can also be used to replace the following Balboa Topside Panels: 53811, 54716 (NO Blower button), 34-53811-K, 58-138-1048, 34-54716-K (NO Blower button)
NOTE 1: A standard VL700S Serial Standard LCD Topside Panel (an overlay may already be applied) and a separate 12684 SpaGuts Overlay 7-button will be provided in a clear sealed bag.
This item comes with 1-year limited warranty.
NOTE 2: Depending on availability, the Overlay/Label may ship with a different color, text, and/or button shape than the picture shown above.
When selecting your spa topside panel, it’s critical that you go by part numbers and not just by appearances or the model number. The part number on a spa topside panel can be found on a white sticker located directly under the topside panel (The ID label may be located on the casing of the topside panel, and the topside panel may need to be removed from the hot tub to get to this label). Buy based on this part number. Model numbers may provide many different options, and choosing the correct option is very critical. Do NOT purchase a hot tub topside panel just because it looks the same as the one you’re replacing. Spa topside panels can look identical, but be programmed differently to work with different spa controllers and circuit boards. ALSO pay attention to the type of cable plug that is on the end of the topside cable. Different spa topside panels use a certain type of cable plug that plugs into compatible spa controllers and circuit boards. Replacement spa topside panels are shipped in clear sealed bags with Yellow Warning Label. Verify through the clear sealed bag that the correct topside panel was received prior to opening the bag. Sealed bags that are opened voids the return policy for spa topside panels.