SpaGuts CS M-Series Electronic Spa Controller Kit with LCD Topside (DISCONTINUED; SEE LINK BELOW)

SpaGuts Top of the Line CS M-Series Electronic Spa Controller with 10-button LCD Topside Panel. Available with a Fixed Position Heater, Model CS9700, or a Slider/Remote Heater, Model CS9707. The heater manifold is made of Stainless Steel Heater Housing with a 5.5KW Heater Element. This controller can operate up to 3 Pumps. Pump 1 and Pump 2 circuits can be setup for dual speed. A Circulation Pump can be installed for 24 hour Filtration only or for Heat and Filtration.

THIS ITEM IS NO LONGER AVAILABLE. IT HAS BECOME OBSOLETED. CONSIDER RETROFITTING WITH ONE OF OUR SPAGUTS SPA CONTROLLER KITS THAT INCLUDES A HI-FLO HEATER AND TOPSIDE PANEL AS A REPLACEMENT OPTION.

NOTE: If using a circulation pump for "Heat and Filtration", the circulation pump must be connected on at least 1.5 inch plumbing and must output at least 25 GPM.

Features

• Pump One and Pump Two circuits up to 2 speeds, 110/220V, 15A Max (Cords Included)
• Pump Three circuit at single speed, 110/220V, 15A Max (Cord Included)
• Blower circuit up to three intensity, 110/220V, 8A Max (Cord Included if selected)
• Ozone circuit 110/220V, 2A Max (Cord Included if selected)
• Circulation Pump circuit 110/220V, 24hr, single speed, 5A Max (Cord Included if selected)
• Auxiliary circuit, 110/220V (constant), 5A Max (Cord Included if selected)
• 12 volt light that plugs into most existing sockets, 1A Max (8ft Harness w/Bulb)
• Freeze Control
• Hi-Limit Control
• Economy Mode
• Timed Filtration
• Real Time Clock Display
• Optional Fiber Optic Light Circuit (Additional Fee Required for Circuit)
• Stainless Steel Heater Housing with 5.5KW Heater Element and Heater ON light, 220V, 23A
• Pressure switch installed for dry heat protection. (Heater to be installed on pressure side of pump)
• Temperature sensors
• Triple Powder Coated metal housing that prevents rust
• Canadian and United States UL Recognition (cURus) and Edison Testing Laboratories (ETL) listed for your safety
• SpaGuts' 2-year limited warranty covering parts and labor

Accessories

• Lighted J&J mini colored component cords with matching receptacles (Visual Diagnostic Cords)
• Water Resistant LCD Topside Panel, 10-Button, 10 ft cable
• 8 feet light harness with socket and 12V light bulb
• Installation and Operation Manuals
• Wiring diagram

Optional

• Auxiliary K-26 4-Button Topside Panel w/o Display, 18ft cord (Sold Separately)
• IR Wireless Remote Control with IR Senor (Sold Separately)

Dimensions (Approx)

• Controller: 13 inch L x 13.75 inch H x 4.25 inch W
• FIXED POSITIONED HEATER: 16.25 inch  L x 2.0 inch  diameter (Hole Diameter is actually 2.25 inches)
• MOVABLE/REMOTE HEATER: 15 inch L x 2.0 inch diameter (Hole Diameter is actually 2.25 inches)
• Topside Panel: 7.0 inch L x 3.25 inch W

Heater Type

System A: This is a "Fixed Position Heater" type controller. The heater is permanently mounted under the controller and cannot be moved.

System B: These controllers have the "Slider/Remote Heater". The heater can be mounted in multiple positions, or can be remotely mounted. The heater comes with a 5ft cord.

This controller kit is also the replacement option for the following part numbers: CS9700-U, CS9707-U, CS9400-U (Will loose VDS),