SpaGuts Heater Assembly, Tubular, Low-Flo, 5.5KW 220V, 5ft Cord, 3/4-inch

Replacement 5.5KW 220V Low-Flo Tubular Heater Assembly for SpaGuts brand Electronic Controllers with Low-Flo Tubular Heater model. The heater is pre-assembled with a Stainless Steel Housing, a 5.5KW Low-Flo Titanium Element, Thermo Cuttoff Switch, 60 inch cord, 3-wire, 3-pin JJM Plug.

THIS ITEM IS CURRENTLY NOT AVAILABLE FOR ORDERING. WE ARE CURRENTLY WORKING ON HAVING THIS ITEM TO BECOME AVAILABLE AGAIN.

SpaGuts P/N: 25-200-3234

Dimensions (Approx): 26" L x 14" W (Metal End to Metal End)

This item comes with a 2-Year limited warranty.

NOTE 1: This heater is only meant for replacement on a SpaGuts or Hydro Quip brand Electronic Controller with Low-Flo Tubular Heater models CS6207, CS6237, CS9707. This heater is also a replacement option for the following heater part numbers: 25-150-1044, 25-250-3234, 48-M78-000-0G00, 26-0066-KIT-FS, C3234-3A, 22-MR8-000-0PP6, 26-0066, 30-0100L-78.

NOTE 2: Included accessories consist of one foam insulation, two cable ties. Install foam insulation on the heater metal tube. Insert the hi-limit sensor bulb fully in between foam insulation and heater metal tube, and use the two cable ties to secure the foam insulation in place. Ground heater with copper bonding wire.

NOTE 3: Installation of this heater should be performed by a licensed electrician or qualified technician. If you are not qualified, DO NOT attempt installation of this heater.