SpaGuts Replacement HL/Temp Sensor, CY-H Series, 18-inch, 26-150-0222

Replacement Hi-Limit and Temperature Sensor for the SpaGuts CY-H Series Spa Controllers. This consist of one sensor that is used for both Hi-Limit and Temperature application, and is meant to be installed directly into the heater.

SpaGuts P/N: 26-150-0222

This sensor assembly is compatible with the following SpaGuts Spa Controller 2020-Present Models: CY6200H (Must have “H” in the Model), CY6230H (Must have “H” in the Model)

This sensor assembly is also a replacement option for the following part numbers: 34-0222-K

Sensor dimension (approx): 18-inch cable, with 1/4-inch diameter x 1.75-inch long bulb

This item comes with a 1-year limited warranty, and is NON-Returnable.

When selecting your spa or hot tub sensor, it’s critical that you go by part numbers and not just by appearances. The part number on a sensor can be found on a white or silver label located directly on the senor cable (The ID label may also be located on the casing of the sensor). Buy based on this part number. Do NOT purchase a hot tub sensor just because it looks the same as the one you’re replacing. Spa and hot tub sensors can look identical, but have different resistant and material to work with different spa and hot tub controllers or circuit boards. ALSO pay attention to the type of cable plug that is on the end of the sensor cable. Different spa and hot tub sensors use a certain type of cable plug that plugs into compatible spa and hot tub controllers or circuit boards.