SpaGuts Topside Panel with Overlay, TP400W, 50583 (SEE REPLACEMENT BELOW)

Replacement SpaGuts Topside Panel with Overlay, model TP400W. OEM part number 50583-04.

THIS ITEM IS CURRENTLY OUT OF STOCK. ESTIMATED IN STOCK DATE IS "UNKNOWN". ALSO SEE THE 30-200-5401 SpaGuts Topside Kit, SGTP540 with Overlay, 7ft Cable AS THE ALTERNATIVE REPLACEMENT OPTION.

Topside cable is approximately 7ft long with 4-pin TP Plug.

SpaGuts P/N: 30-175-0583

4-Button Configuration: (Left to Right) Warm-Cool-Light-Jets

Topside Dimension (Approx): 8.3 inch x 2.5 inch

This topside panel is compatible with the following Balboa Control Systems: BP100, BP501, BP601, BP7, BP2000, BP2100

This topside panel is also a replacement option for the following part numbers: 55702 (TP400W; No Overlay), 50259, 12510 (Overlay Only), 34-50259-K, 80-12510 (Overlay Only), 33107-01 (Casing ONLY; Must Confirm Model and Button Layout)

This item comes with a one year limited warranty.

NOTE: Depending on availability, the Overlay/Label may ship with a different color, text, and/or button shape than the picture shown above.

When selecting your spa topside panel, it’s critical that you go by part numbers and not just by appearances or the model number. The part number on a spa topside panel can be found on a white sticker located directly under the topside panel (The ID label may be located on the casing of the topside panel, and the topside panel may need to be removed from the hot tub to get to this label). Buy based on this part number. Model numbers may provide many different options, and choosing the correct option is very critical. Do NOT purchase a hot tub topside panel just because it looks the same as the one you’re replacing. Spa topside panels can look identical, but be programmed differently to work with different spa controllers and circuit boards. ALSO pay attention to the type of cable plug that is on the end of the topside cable. Different spa topside panels use a certain type of cable plug that plugs into compatible spa controllers and circuit boards. Replacement spa topside panels are shipped in clear sealed bags with Yellow Warning Label. Verify through the clear sealed bag that the correct topside panel was received prior to opening the bag. Sealed bags that are opened voids the return policy for spa topside panels.