Sta-Rite® Dura-Jet by Balboa Spa Pump Replc, 1.5HP, 110V, 2spd, 48Y, 2.0in, DJAYFA-0101

Replacement spa pump for Sta-Rite® or Dura-Jet brand. This is a dual speed pump with ratings:  1.5HP, 110V, 48-Frame, 60Hz, 2.0 inch intake and discharge.  OEM Part Number DJAYFA-0101 and 4239113-S/B.

SpaGuts P/N:  15-175-2196

Features:

• Rated 1.5HP, 115V, 13.0/3.7A (Amp Rating Varies by Motor)
• 2-Speed Pump (can also be wired for single speed)
• 48-Frame Motor
• 2.0 inch Center Suction, 2.0 inch Side Discharge
• Replaces most DJAYFA pumps with similar amp draw and voltage rating
• This pump is normally used in Dimension One Spas, Hawkweye Spas, Master Spas and Great Lakes Spas
• UL and CSA certified
• All seals are cabon ceramic with Viton® elastomers for long-lasting performance
• Petite volute and compact 48 frame design allow for easy installation in hard to fit areas
• Whisper quiet operation assures a peaceful spa experience

This is a Side Discharge Pump with 2.0-inch fittings.  Outside thread to outside thread measurement on the pump fittings is approximately 3.1 inches. (Pump Unions sold separately)

The pump image shows the pump discharge on top pointing to the 12 o'clock position.  The pump discharge can also be rotated every 90-degrees (3, 6 or 9 o'clock positions) by loosening the four long bolts at the back of the motor.  The pump intake (suction) is located in the front center face of the pump.

The pump normally ships from the factory with the discharge pointing "UP" which is the standard position for shipping, but they can be turned or what is called "clocked" into any position (12, 3, 9 or 6 o'clock position).  Rotation of the pump discharge can be done in the field, but we recommend having it performed by a professional spa technician who is experienced.  Or choose the option to have the pump professionally rotated at the factory before it ships.  This is to avoid water leaks and operational problems due to improper removal and installation in the field that will affect the warranty.  As you face the front end of the pump wet end, available positions are 12 o'clock (Up), 3 o'clock (Right), 9 o'clock (Left), and 6 o'clock (Down, which is very rare).

You may add a cord to be attached to the motor at a discounted price.  See cord options above.

If buying this pump for retrofitting, add a pair of pump unions that connects to your pipes which then screws directly onto the pump threaded fittings.  O-rings are included with the pump unions.  Regular price is $22.95.

If buying this pump as an exact replacement that does not require retrofitting, it is highly recommended to replace the pump union o-rings at the same time.  Old pump union o-rings may cause leaks that can damage the new pump and affect the warranty.  O-rings for pump unions are only available with a pump union purchase.

Note that a 48-Frame motor normally has a back end motor diameter of approximately 5.5 inches.

This item comes with a 2-Year limited warranty.

This pump is also a replacement option for the following pump models: Ulta Jet, DJAYFA-0001, DJAYFA-0007, DJAYFA-0062A, DJAYFA-0082, DJAYFA-0152, DJAYFA-0162, DJAYFA-0162A, DJAYFA-0182, DJAYFA-3022, DJAYFA-3022H, DJAYFA-3062, DJAYFA-3097, DJAYFA-3122, DJAYFA-3122H, DJAYFA-3152, DJAYFA-3162, DJAYFA-9022, DJAYFA-9122, PUULS215138GRH, 1014218, PUULS215138H, PUULS225258HA, T55CXBFD-548 (Motor Only. Must verify Pump), 5KC38RM3818X (Motor Only. Must verify Pump), DJAYFA-0003, DJAYFA-0142B, DJAYFA-9111