56-frame, 2-speed, AO Smith aka Century Electric Spa
Motor with a high performance pump in a range of sizes from 2.0
horsepower to 5.0 horsepower.
- 15-350-2197, 372082A-1D, 2 HP 8.0/3.0A, 2" intake.
- 15-350-2198, 372122A-1D, 3 HP 10.0/3.4A, 2" intake.
- 15-350-2196, 372162A-1D, 4 HP 12.0/4.4A, 2" intake.
- 15-350-2199, 372202A-1D, 5 HP 16.0/4.8A, 2" intake.
- 15-350-3197, 372082A-13, 2 HP 8.0/3.0A, 2.5" intake.
- 15-350-3198, 372122A-13, 3 HP 10.0/3.4A, 2.5" intake.
- 15-350-3196, 372162A-13, 4 HP 12.0/4.4A, 2.5" intake.
- 15-350-3199, 372202A-13, 5 HP 16.0/4.8A, 2.5" intake.
The pump image shows the pump discharge on top pointing to the 12 o'clock position. The pump discharge can also be rotated every 90-degrees (3, 6 or 9 o'clock positions) by loosing the four long bolts at the back of the motor. The pump intake (suction) is located in the front center face of the pump.
Pumps with 56-frame motors come standard in 2.0 inch side discharge. You may select the intake to be 2.0 inch or 2.5 inch. NOTE that a 2.0 inch fitting will have an outside thread measurement of approximately 3.1 inch, and a 2.5 inch fitting will have an outside thread measurement of approximately 3.6 inch.
If buying this pump for retrofitting, add a pair of pump unions that connects to your pipes which then screws directly onto the pump threaded fittings. O-rings are included with the pump unions. Regular price is $15.55.
If buying this pump as an exact replacement that does not require retrofitting, it is highly recommended to replace the pump union o-rings at the same time. Old pump union o-rings may cause leaks that can damage the new pump and affect the warranty. O-rings for pump unions are only available with a pump union purchase.
You may add a cord to be attached to the motor at a discounted price. See cord options below.
The pump normally ships from the factory with the discharge pointing "UP" which is the standard position for shipping, but they can be turned or what is called "clocked" into any position (12, 3, 9 or 6 o'clock position). Rotation of the pump discharge can be done in the field, but we recommend having it performed by a professional spa technician who is experienced. Or choose the option to have the pump professionally rotated at the factory before it ships. This is to avoid water leaks and operational problems due to improper removal and installation in the field that will affect the warranty. As you face the front end of the pump wet end, available positions are 12 o'clock (Up), 3 o'clock (Right), 9 o'clock (Left), and 6 o'clock (Down, which is very rare).
This 56-Frame pump also replaces the Aquastorm pump models by Infinity Spas, the Massage Master XLT, and the Super-Flo. Just match the size fittings and amp rating to get the same performance pump.
Replacement option for the following pump part numbers: 3720821-1D (2HP, 2.0" Intake), 3721221-1D (3HP, 2.0" Intake), 3721621-1D (4HP, 2.0" Intake), 3722021-1D (5HP, 2.0" Intake), 3720821-13 (2HP, 2.5" Intake), 3721221-13 (3HP, 2.5" Intake), 3721621-13 (4HP, 2.5" Intake), 3722021-13 (5HP, 2.5" Intake), PF-50-2N22C (5HP), PF-45-2N22C (5HP), PF-50-2N22M (5HP), PF-20-2N22C4 (3.0HP 48Y, labeled 5.0HP), 3420820-0ADY (3.0HP 48Y, labeled 5.0HP), PF-40-2-RV22C (4.0HP), 3721621-1385V (4.0HP), 7-187694-01 (Motor Only, 3.0HP), Dynasty 14854 (7.0 BHP), Dynasty 12600 (5.0 BHP), 3722021-0T7GDY (5.0HP), 3721221-0385 (3.0HP), 3722021-0D86 (5.0HP), 34-270-3332 (5.0HP 1-Speed), 34-270-3356 (5.0HP), 3420820-0A6RDY (3.0HP Executive Pump with 48-Frame Motor), Model PF-30-2N22C, 3721221-0D5A (3HP), 3721621-0385V (3HP), R63MWENA-4727 (Motor Only; Must verify Pump Wetend), 3721221-0D87 (3HP), 0-187098-02 (Motor Only; Must verify Pump Wetend), Beachcomber PF-25-2N22C (3HP, 2.5" Intake)
We also offer the 48-frame, 2-speed, AO Smith Electric Spa Motor with a high
performance pump in a range of sizes from 1.0 horsepower to 4.0
horsepower, see 48-frame pump page.
Our dual speed motors can also be wired to operate in single speed.
AO Smith is one of the largest manufacturers of spa motors in the world
and in our opinion is the very best money can buy. We offer brand new
pumps and motor, also the best in the industry.
Pumps with 56-frame motors carry a 1-year limited warranty.
Keep in mind to not over power your spa by going from a 48-frame motor
to a 56-frame motor.
Is Your Pump Above the Water Line?
If you need to install your spa pump near or above the waterline - as is
common for in-ground spas - you will need a pump pot.
The pump pot help prevents water from draining back
into the spa when the motor is turned off