Aqua-Flo Flow-Master XP2 48Y Spa Pump, by Gecko, 4.0 BHP, 3.0 HP Continuous, 220V, 06130395-2040 (OBSOLETE; SEE REPLACEMENT LINK)

Aqua-Flo Flow-Master XP2 Spa Pump, by Gecko.  Rated 4.0 Break Horse Power (BHP), 3.0 Horse Power Continuous (HP), 220V, 2-Speed, 13.1A/3.3A, 60Hz, 48-Frame.  OEM part number 06130395-2040.

THIS ITEM IS NO LONGER AVAILABLE. IT HAS BECOME OBSOLETED BY THE MANUFACTURER. PLEASE SEE LINKS BELOW TO ALTERNATIVE REPLACEMENT OPTIONS. YOU MAY ALSO CONTACT US IF YOU NEED HELP TO DETERMINE ALTERNATIVE REPLACEMENTS.

OPTION 1:  SEE LINK TO THE 15-350-1821 EX2 48Y 4.0HP 220V 2SPD SD Waterway Spa Pump, 2.0 inch, 3421821-1U AS AN ALTERNATIVE REPLACEMENT OPTION.

OPTION 2:  SEE LINK TO THE 269A Aqua-Flo Flow-Master XP2e 56Y Spa Pump, by Gecko, 4.0 BHP, 3.0 HP Continuous, 220V, 05334012-2040 AS AN ALTERNATIVE REPLACEMENT OPTION THAT REQUIRES ROOM TO FIT THE LARGER MOTOR.

OPTION 3:  SEE LINK TO THE 15-973-5640 LX Spa Pump, 56WUA, 4.0 HP 220V, 2-Spd, SD, 2.0in, 60Hz, 56Y, 56WUA400-II AS AN ALTERNATIVE REPLACEMENT OPTION THAT REQUIRES ROOM TO FIT THE LARGER MOTOR.

NOTE: The pump photo shown above only shows one capacitor mounted on top of the motor. We cannot guarantee if the motor that is shipped will have 1 or Dual Capacitor attached to the outside of the motor housing, and at a specific location due to different motor models that are supplied. Make sure there is plenty of room where the spa pump is located for a motor that may have a single of dual motor capacitor on the outside of the motor housing.

SpaGuts P/N: 15-720-0395

This is a Side Discharge Pump with 2.0-inch fittings. Outside thread to outside thread measurement on the pump fittings is approximately 3.0 inches. (Pump Unions sold separately)

Dimensions (approx.):  16.5 inches L x 8 inches H x 8 inches W

Motor part numbers that are normally used for this pump:  T55MWCBB-1185 (CAT NO 9352-7111)

Also known as pump model 06130395-2.

The pump image shows the pump discharge on top pointing to the 12 o'clock position.  The pump discharge can also be rotated every 90-degrees (3, 6 or 9 o'clock positions) by loosing the four long bolts at the back of the motor.  The pump intake (suction) is located in the front center face of the pump.

This pump is also the replacement option for the following spa pump part numbers:  06630485-2, 06130310, 07830707-2, 06130395-2040, 06630309-2, T55CXBSR-1076 (Motor ONLY; MUST verify Pump Housing to match), 06630397-2, T55MWCBB-1185 (Motor ONLY; MUST verify Pump Housing to match), 06630450-2, 06630489-2, 07830306-2, 06630397, X321000, X320420 (3.0HP), X320450 (2.0HP), 06630370-2, 1-00-0132, 07830306-1, 06130319-2, 06630330-2, 06130308-2, 06630395-2, 06630176-2, 06530500-2, 06630394-2, 06630500-2, 06625485-2, 15-200-0395, 05625287-1, T55MWBNN-1009 (Motor ONLY; MUST verify Pump Housing to match), T55CXBNN-1009 (Motor ONLY; MUST verify Pump Housing to match), WUA400-II, 91231606 (Suction Cover, Faceplate)

This XP2 Pump is also the replacement option for the "Relia-Flo" pumps by Caldera Spas. Verify motor amp rating and voltage, the pump discharge type and size fitting to match. Note that the new motor will not have the cover with heat vent connection. The original motor cover with heat vent connection may be used on the new motor if it fits, otherwise retrofitting a heat vent is required.

This item comes with a 2-year manufacturer's limited warranty.