Balboa VS501Z Spa Control System, 5.5KW HTR, (No Topside/Cords), G5152

TO PLACE AN ORDER, SEE LINK TO 11-200-4356 BALBOA VS501Z SPA CONTROL SYSTEM, 5.5KW HTR, (NO TOPSIDE/CORDS).

The Balboa VS501Z Spa Control System with 5.5KW Heater is field configurable. Internal component circuits can be setup to work with your existing pump, blower and ozone. OEM part number for this system is G5152.

See the SpaGuts brand VS501Z Single Pump Spa Controller w/ Topside, 54801 and SPAGUTS BRAND SGVS501Z SPA CONTROLLER KIT W/ VL200 TOPSIDE, 5.5KW. It is built by Balboa and offers a better value with an upgraded topside and a 2 year warranty!

An option only available from SpaGuts, this VS Series is available Factory Configured to your exact specifications or as a Retrofit Kit that is easily field configured at the time of installation. Competitors only offer controllers as a Retrofit "do it yourself kits" without the time saving Factory Configuration optionally available by SpaGuts. Factory Configuration includes set-up and bench testing of Internal component circuits to work with your existing pumps, blower, ozone and circulation pump so you don't have to do any internal wiring or programming, making your controller plug and play right out of the box. Best value for most installers; saves time and prevents costly installation errors.  Once the order is placed with the Factory Configuration Fee, we will contact you to collect information that is required to setup the controller.

SpaGuts P/N: 11-175-4356

This controller operates on 110/220V (220V requires 4-wire service). The VS501Z controller is equipped with M7 technology which allows the heater to be mounted either on the suction or discharge side of the pump.

Features:

• Pump 1 Circuit, 2-speed, 110/220V, 12A Max
• Blower or Pump 2 Circuit, 1-speed, 110/220V, 10A Max
• Circ Pump Circuit, 110/220V, 4A Max (24Hr when activated, Requires 25 GPM)
• Ozone circuit, 110/220V, 1A Max
• Audio/Video circuit, 110/220V, 2A Max (Constant Circuit)
• Light Circuit, 12W, 1A Max
• 1.375/5.5KW, 120/240V Flo-Thru Incoloy High Flow Heater with M7 Technology
• Stainless Steel Heater Housing
• Plug N Click Heater Cables
• Pair of 2.0 inch Heater Tailpieces with O-Ring Gaskets
• No Pressure Switch. Heater can be installed on suction or discharge side of pump
• UL Recognized for your safety
• Freeze protection
• High-limit protection
• Filtration mode
• Economy Mode
• 1-Year Limited Warranty (Extended Warranty Option is available upon ordering)

Controller Dimensions are 12 inch L x 11 inch H x 4.5 inch W (approx)

Heater Dimensions are 15 inch L x 2 inch Diameter (approx)

Compatible Balboa Topside Panels: 52144 (VL200), 53850 (VL404), 52312 (VL200), 55050 (VL260), 53645 (VL260), 55559 (VL260), 54754 (VL260), 55049 (VL260), 55051 (VL260), 53566 (VL260), 53777 (VL260), 51223 (VL404), 51248 (VL404), 53646 (VL240), 53565 (VL240), 55129 (VL400), 50176 (VL400), 54094 (VL401), 54251 (VL401), 54107 (VL402), 54093 (VL402), 54104 (VL403), 51676 (VL403), 55349 (VL406T), 55570 (VL406T)

This controller system is also a replacement option for the following part numbers: 54379-03 (4.0KW), 54356-03, 53267, 54356hc1vs501z, 55860, EP6551-2, 51-54356-Z, G4152 (4.0KW)

Also see the SPAGUTS BRAND VS501Z SINGLE PUMP SPA CONTROLLER KIT W/ TOPSIDE. It is built by Balboa and offers a better value with an upgraded topside and a 2 year warranty!