Flo-Thru Heater Element, Low Profile Triple Bend, Standard, Incoloy, 5.5KW, 25-40341L

Replacement Flo-Thru Heater Element, Triple Bend, Low Profile, with Standard Bulkhead, Incoloy Metal. Outputs 5.5KW on 220V, and 1.5KW on 110V. OEM part number 25-40341L.

THIS ITEM IS NO LONGER AVAILABLE. IT HAS BECOME OBSOLETED BY THE MANUFACTURER. SEE OPTIONS BELOW:

OPTION 1: IF "NO" SENSOR THERMOWELL ON ORIGINAL HEATER HOUSING, OK TO USE PART NUMBER 25-150-0110 OR PART NUMBER 25-150-1201

OPTION 3: IF THERE ARE SENSOR THERMOWELLS ON ORIGINAL HEATER HOUSING, CHECK OUT PART NUMBER 25-250-1341.

SpaGuts P/N: 25-250-0341

Dimensions (Approx): 9.5 inches long and fits in a 15 inch long Flo-Thru heater tube that is at least 2.25 inches in diameter (known as 2 inch heaters). The distance between the heater terminals from center point is 1.25 inches. Verify to make sure the old heater element looks the same as shown, and has the same measurements.

5.5 kw = 18766 BTU

Heater Elements that we provide are OEM Factory Replacement Parts and made in the U.S.A.These heater elements are USA and Canada Underwriters Labortories listed for your safety.

This item comes with a one year limited warranty, and is NON-Returnable.

This is the replacement heater element for the 20-08421 Baptistry or Baptismal Heater Unit.

To determine whether a this element will work in yourcontroller, remove your existing element from the heater metal tube. If theelement has two standard probes on it that drop into the control box and hasthe same shape as the one above, then it will work in yourcontroller. If it does not look the same, check out our other heaters.