Max Air Hi-Performance Spa Blower with Amp Cord, 2.0HP, 110V

THIS ITEM IS NO LONGER AVAILABLE. IT HAS BECOME OBSOLETED BY THE MANUFACTURER. PLEASE SEE LINK TO THE 15-415-9201 ULTRA 9000 HI-PERFORMANCE SPA BLOWER WITH AMP CORD, 2.0HP 110V AS THE ALTERNATIVE REPLACEMENT OPTION.

New and Improved 2.0HP, 110V, 9.0A ~ 9.9A Max Air Blower with a 2-YEAR LIMITED WARRANTY and FREE SHIPPING. Comparing to others only offering a one year warranty and charging a handling fee. New design, quieter than the most leading spa blowers in the market, and with a high performance motor.

The Max Air Blower is guaranteed to last longer, and comes with a 2 year limited warranty.

SpaGuts P/N: 15-415-2000

Features:

• 2.0HP, 110V, 9.0A ~ 9.9A, 60Hz
• Durable, rust-free plastic housing
• Life expectancy of 1200hrs
• Decibels 65-67 at 1 meter
• Class A insulation with thermal overload protection
• 5.0 amp fuse for over current protection
• Ambient temp of 60 degrees Celsius or less
• Attached 4ft Amp Cord (Adapter Cords are optional)
• UL recognized file E107002
• CSA approved file LR93782

Dimensions (Approx): 9.0 inch L x 6.5 inch W x 6.75 inch H

Max Air Blower with new revolutionary motor improves performance dramatically while running cooler and much quieter. In a typical spa you can expect up to 25% more air and 30% greater pressure than a standard motor.

The 2.0 HP Max Air Blowers have an open flow of 120 CFM (blower not connected to anything). The 2.0 HP Blower has a sealed pressure of 115 Inches H20.

New housing design with air inlet through the bottom creates a tortuous path, trapping noise inside blower for ultra quiet performance.

The blower has 1.5 inch fitting. Use a 1.5 inch pipe to easily connect to a blower check valve. And from the check valve to a 2.0 inch coupler to easily connect to a 2.0" pipe.

Replacement option for the following blower part numbers: 2518120, 2518120F-amp, 2518120F-jjm, 25220131

NOTE 1: This blower can operate on multiple speeds if connected to a controller with multiple speed circuit.

NOTE 2: If a blower with built-in air switch is needed, contact SpaGuts sales department for this option.

If you are replacing your blower we strongly recommend installing a new in-line blower check valve which will protect your blower from damages due to the back-flow of water when your jets are turned off after use.