Max Air Hi-Performance Spa Blower with Amp Cord

Out of stock
Out of stock

New and Improved 1.0HP and 1.5HP Max Air Blowers V3 models with a 2-YEAR LIMITED WARRANTY and FREE SHIPPING.  Comparing to others only offering a one year warranty and charging a handling fee.  New design, quieter than the most leading spa blowers in the market, and with a high performance motor.



The Max Air Blower is guaranteed to last longer, and comes with a 2 year limited warranty.

SpaGuts P/N:

  • 15-415-1000, 1.0HP 120V 4.8A ~ 6.0A  NO LONGER AVAILABLE
  • 15-415-1002, 1.0HP 240V 2.5A ~ 3.0A  NO LONGER AVAILABLE
  • 15-415-1500, 1.5HP 120V 7.8A ~ 8.3A  NO LONGER AVAILABLE
  • 15-415-1502, 1.5HP 240V 3.8A ~ 4.2A  NO LONGER AVAILABLE


  • Durable, rust-free plastic housing
  • Life expectancy of 1200hrs
  • Decibels 65-67 at 1 meter
  • Class A insulation with thermal overload protection
  • 110V Blower is rated 60Hz
  • 220V Blower is rated 50/60Hz
  • 5.0 amp fuse for over current protection
  • Ambient temp of 60 degrees Celsius or less
  • Attached 4ft Amp Cord (Adapter Cords are optional)
  • UL recognized file E107002
  • CSA approved file LR93782

Dimensions (Approx):  9.0 inch L x 6.5 inch W x 6.75 inch H

Max Air Blower with new revolutionary motor improves performance dramatically while running cooler and much quieter. In a typical spa you can expect up to 25% more air and 30% greater pressure than a standard motor.

The 1.0 HP/1.5 HP Max Air Blowers have an open flow of 105/110 CFM (blower not connected to anything). The 1.0 HP Blower has a sealed pressure of 80 Inches H20. And the 1.5HP Blower has a sealed pressure of 110 inches H20.

New housing design with air inlet through the bottom creates a tortuous path, trapping noise inside blower for ultra quiet performance.

The blower has 1.5 inch fitting.  Use a 1.5 inch pipe to easily connect to a blower check valve.  And from the check valve to a 2.0" coupler to easily connect to a 2.0 inch pipe.

Great replacement for the Ultra 9000 model blowers. Both the Ultra 9000 and Max Air blowers are made by the same manufacturer and also uses the same motor. The only difference is the plastic housing and plumbing size connection. The Max Air blower uses a more durable housing, and has 1.5 inch plumbing fittings. Both blowers are about the same size in dimensions.

Replacement option for the following blower part numbers: 2510120F or 2510120 or 12510120F-amp or 12510120F-jjm (1.0 HP, 110V); 2513121 or 12513120F-jjm or 12513120F-amp (1.5 HP, 110V); 2510220 or 12510220F-amp or 12510220F-jjm (1.0 HP, 220V); 2513220 or 12513220F-amp or 12513220F-jjm (1.5 HP, 220V), 1251020F-3j or 251020F-3j (1.0HP Blower with 300W Heater), 12510120F3J (1.0HP 110V 7.0A Nema Plug), HPFF10-120R (1.0HP 110V), HPFF10-240R (1.0HP 220V), 2510131 (1.0HP 110V), 2510231 (1.0HP 220V), 2515131 (1.5HP 110V), 2515231 (1.5HP 220V), 6500-148 (1.0HP 220V)

NOTE 1: This blower can operate on multiple speeds if connected to a controller with multiple speed circuit.

NOTE 2: If a blower with built-in air switch is needed, contact SpaGuts sales department for this option.

If you are replacing your blower we strongly recommend installing a new in-line blower check valve which will protect your blower from damages due to the back-flow of water when your jets are turned off after use.


Write Your Own Review
You're reviewing:Max Air Hi-Performance Spa Blower with Amp Cord
Your Rating
Contact Us