SpaGuts Universal Flo-Thru Heater Assembly, Titanium, 4.0KW

SpaGuts 4.0KW 220V Titanium Universal Flo-Thru Heater Assembly. The heater metal housing and heater element are made out of Titanium. Great for Salt Water Application. Works with many spa controllers that has a High Flow Flo-Thru Heater attached. This heater assembly is also a replacement option for many Balboa heater models that has the same size and dimension.

THIS ITEM IS NO LONGER AVAILABLE. PLEASE SEE LINK TO THE 25-150-0428 RITE-FIT HEATER ASSEMBLY AS THE ALTERNATIVE REPLACEMENT OPTION.

SpaGuts P/N: 25-250-4000

Dimensions (Approx): 15 inches long x 2 inches diameter

On 110V application, heater outputs 1.0KW.

A pair of 2 inch heater split nuts and heater tail pieces with o-ring gaskets are included.

Features:

• Titanium Heater Metal Housing and Heater Element
• Fully adjustable mounting stubs. Adjust to fit in mounting holes within the controller
• 5 pressure switch mounting port locations
• Mount plugs on pressure switch mounting ports
• Adjustable sensor cover plate

NOTE: This Universal Heater Assembly does not fit SpaGuts and Hydro-Quip CS Series and M Series Models (Fixed or Movalable) or Gecko brand controllers. Also does not fit Spa Builders SSPA and MSPA model controllers.

This item comes with a 1 year limited warranty against manufacturer's defect, and a 2 year limited warranty against corrosion.

Replacement Option for the following Heaters (Sensors, Pressure Switch and 1.5inch Tailpieces/Reducers Sold Separately): C2400-5000-1Z, C2400-5000-1Z-BI, 50143, C2400-0739ET and C2400-0739 (Tailpiece with PSI tap sold separately), C2400-0315, C2400-5000-2, C2400-5000-2B , C2400-5000-1, 58148 (4.0KW, 1.5" Tailpieces), 55033 (4.0KW, 1.5inch Tailpieces), 55033-01 (4.0KW, 1.5inch Tailpieces), 55033-02 (4.0KW, 1.5 inch Tailpieces), 55035 (4.0KW, 1.5inch Tailpieces), 55035-01 (4.0KW, 1.5inch Tailpieces), 102372 or 54598 (Coleman 4.0KW, MUST use original tail piece with PSI Tap), 25-150-1025, 48-1540-RP, 50142 (4.0KW, 1.5inch Tailpieces), C2400-5000-P, 10039, 25-250-0809, C2400-0809-TPS, 58081, 26-58081-5S-KP, 26-0535-5S-KP, 58068, 58085, C2400-0535-TPS, C2400-0535, 2-00-5003, C2400-0314ET, C2400-0314, 20-5011, 20-00317, 90-225011, C2400-0304TI, C2400-0304T1, 20-00433, 20-00434, 20-00454, B24040E, C2400-0356ET, C2400-0356, 48-1540-HQ (14.5inch L)

4.0KW UL Model Number: 26-0071B-XXX (DO NOT ORDER BASED ON THIS MODEL NUMBER. THIS IS JUST THE BASE HEATER UL MODEL NUMBER WITHOUT ANY HOLE TAP. ONLY USE THE ORDER CODE TO DETERMINE THE REPLACEMENT HEATER)

Looking to just replace the heater element? Check out our Flo-Thru Heater Element.

For the OEM Titanium Heater Assembly to fit SpaGuts and Hydro Quip CS Series and M Series Models brand controllers click: SpaGuts OEM Titanium Heater Assembly, CS Series.