Uni-Might Circulation Pump, 1/8 HP, 110V, 1.6A

Out of stock
Out of stock

This is a 24 hour Uni-Might circulation pump, with 48-frame AO Smith motor (Century Laser), and a hi-flo side discharge wet end for optimum flow. Delivers 40 gpm to maintain strong water flow, 1/8 HP, 110V, 1.6 amps, viton seal for maximum leak protection. Compatible with Spaguts controllers and many other brand controllers.

SpaGuts P/N: 15-350-1003

Threaded fittings are standard 1.5 inch (approximately 2-3/8 inch if measuring from outside thread to outside thread of fittings).

Replacement option for the following part numbers: 3410030-0X86, 3410030-0X, 341003A-0X, 1-05-0398 (Wetend Only; with mounting bracket), 91040910 (Wetend Only; with mounting bracket), 3410030-1X

Also a great replacement for the following Aqua-Flo's 1/15 HP FMVP circulating pumps: 02410684-2, 02410, 00710000-2, 00710001-2, 00710348-2, 00710002-2

Dimensions are 11 inches long, 8.25 inches high, 6.5 inches wide.

Motor part numbers that are normally used for this pump: K55MYGJN-8255, K55MYGJN-8233

The pump image shows the pump intake and discharge on top pointing to the 12 o'clock position. The pump intake and discharge can be rotated every 90-degrees (3, 6 or 9 o'clock positions). Loosen the four long bolts at the back of the motor to rotate the pump discharge. Loosen the four bolts at the front end of the wet end to rotate the pump intake.

This item comes with a one year limited warranty.


Write Your Own Review
You're reviewing:Uni-Might Circulation Pump, 1/8 HP, 110V, 1.6A
Your Rating
Contact Us