Waterway In-Line Filter System, 50 sqft Cartridge with Bypass Valve

Replacement In-Line Filter System with Bypass Valve.  Includes complete filter housing with cap, and a 50 sqft Cartridge.  OEM part number 500-5070.

THIS ITEM IS NO LONGER AVAILABLE. IT HAS BECOME OBSOLETED BY THE MANUFACTURER. PLEASE SEE LINK TO OTHER FILTER SYSTEMS WE CARRY AS AN ALTERNATIVE REPLACEMENT OPTION.

SpaGuts P/N:  20-350-5070

This filter system is meant to be install vertically as shown with 1.5 inch threaded connections at the bottom.

PLUMBING INSTRUCTIONS:  Connects to 1.5 inch pump unions, or glue in 1.5 inch pvc pipes directly into the hole fittings.

Dimension:  17.88 inch H x 8.9 inch W x 5.72 inch housing diameter (Approx.)

The filter housing and cap comes with a 1-year limited warranty.  Included filter cartridge comes with a 90-day limited warranty.

To purchase a replacement In-Line Filter Cartridge, Click here.

NOTE:  When installing an In-Line Spa Filter System, either install it before the heat pump and controller with heater or after the heat pump and controller with heater.  Never install the spa filter system in between the heat pump and controller with heater.  This causes water flow restrictions preventing the heater from activating, or may allow the heater to overheat affecting the warranty.  Based on the flow rating of the spa filter system, it is normally plumbed in with a small circulation pump.  For a dual speed jet pump application, be sure to create a water flow bypass plumbing around the spa filter system for sufficient water flow.  For systems installed near or above the water level, and more than 5 feet from the tub, install the In-Line Spa Filter System after the heat pump and controller with a water flow bypass plumbing.  A water flow bypass plumbing allows half of the water to go through the spa filter system and half of the water to go around the spa filter system.  This way water flow is not restricted.  A water check valve or a ball valve may be used on the return side of the bypass plumbing to help move part of the water through the spa filter system.  Eventually the spa water will get filtered during the filter cycles.  Check with the manufacturer and a licensed spa technician for proper installation.  We recommend NSF rated flexible PVC for simpler connections.  Click here for more information.