Balboa VS501Z Circuit Board, 54357-04

In stock
In stock

Replacement Balboa circuit board for the VS501Z spa controller model.  Chip Number VS501ZR2D. OEM part number for circuit board is 54357-04.

SpaGuts P/N: 10-175-3005

Board Features: Pump 1 dual speed, Blower/Pump 2 single speed, Ozone, Circ Pump

Circuit Board dimension (Approx): 11 inch x 5 inch

This circuit board is compatible with the following Balboa Topside Panels: 52144, 51676, 51223, 51248, 54094

This circuit board is also the replacement option for the following Balboa Circuit Boards or Systems (NOTE: If using as a replacement board for a Viking Spa or other Spas, make sure the pumps are rated NO MORE than 230V 12A): 54585 (INFI07), 55191, 55035-01 (System), 55036-01 (Chip VS240RR2C), 53268, 53267 (System), 55371 (CS501Z), Chip VS501ZR1B, Chip VS501ZR2B, Chip VS501ZR2C, Chip VS501ZR2D, 54356 (System), 54293-03 (SYSTEM MAAX 167 VS501Z), 54294-01 (BOARD MAAX 167 VS501Z), Chip 167R1B, 56075-02 (SYSTEM MAAX 171 MXVS501Z), 59-138-1683, 3-60-0081, 33-0032B-K, 33-0032B, 54379-03 (System), 55191 or INFI07R1A (Verify Topside Panel for Compatibility), 55405 (MS520, X801125), 56926, 54380/54381/53787/53788 (VKV502), 53553/53554 (GVS501, will not support Silent Sentry), 55227/55228 (OS501Z), 55518-01 (TS501ZTi), 56654 (VS501Z), G1152 (VS501Z)

This item comes with a 1-year limited warranty.

When selecting your spa circuit board, it’s critical that you go by part numbers and NOT just by appearances. The part number on a spa circuit board can be found on a white sticker located directly on the circuit board (The ID label may be located on the board relays or on the transformer). Buy based on this part number. Do NOT purchase a hot tub circuit board just because it looks the same OR have the same Model Number as the one you’re replacing. Spa circuit boards can look identical, but be programmed differently to work with different spa controllers and topside panels.  NOTE that most circuit boards need to be configured in the field to work with the existing spa components and power ratings, and a licensed professional is recommended for installation and configurations. If this circuit board is being used as an optional replacement for the original circuit board, please follow the new circuit board wiring diagram for proper installation and configuration setup. Replacement spa circuit boards are shipped in clear sealed bags with Yellow Warning Label. Verify through the clear sealed bag that the correct circuit board was received prior to opening the bag. Sealed bags that are opened voids the return policy for spa circuit boards.

CIRCUIT BOARD PURCHASE AGREEMENT: Manufacturer's Warranty DOES NOT cover burnt terminal blocks or connections, burnt or blown fuses, burnt traces or terminals for circuit board purchases. These are normally caused by field installation errors, loose connections and/or over current draw from external electrical wiring and/or components. This warranty agreement applies to ALL orders made over the phone, online orders, and through purchase orders.

Write Your Own Review
You're reviewing:Balboa VS501Z Circuit Board, 54357-04
Your Rating
Contact Us