DEL T3 Ozonator Kit with JJ mini cord (SEE REPLACEMENT BELOW)

DEL Ozone T3 uses a Tri-Axial CD Technology to create a high ozone output.

The T3 provides longer life than CD-chip technology. Rated life span for normal use is up to 35,000 hours. This ozonator is rated for spas up to 1,000 gallons.

THIS ITEM IS NO LONGER AVAILABLE. IT HAS BECOME OBSOLETED BY THE MANUFACTURER. PLEASE SEE THE 35-200-2107 Dual Voltage DEL UO3 Ozone Unit AS THE REPLACEMENT OPTION.

DEL Ozone T3 is considerably more energy efficient than UV ozone generators resulting in low overall power consumption, low heat generation, lower operating costs and less frequent replacement costs. The T3 is also water back flow resistant, EMI protected and available in 110 or 220 volts. Attached to the T3 is a 48 inch J&J mini cord that plugs into SpaGuts brand spa controllers or any spa controllers that accepts a J&J mini type plug. The ozone cord can also be spliced and hard wired to an existing cord.

Features

• Water Back Flow Resistant
• EMI Protected
• 2x Longer Life than CD Chip
• Ozone Indicator Lamp
• 1/4 inch and 3/8 inch Hose Barb Fitting
• 48 inch J&J mini cord
• Includes ozone tubing, hose clamps, and check valve
• Detailed Installation and Operation Manual
• Made from all ozone resistant material
• Nipple fittings are for air intake and ozone output

Specifications

• Dimensions are 5.5 inch L x 4.75 inch W x 2 inch D
• Up to 65 mg/hr Ozone Output
• Available in 110V or 220V, 50/60Hz
• 0.03 - 0.07 A, 6.9-8.4 Watts
• Molded Polycarbonate Enclosure
• UL Listed
• 1-Year Limited Warranty

If you are adding this to a spa that is not ozone ready, you will also need to buy either an ozone saddle clamp or an ozone inline bypass kit.

For spas that have a small circulation pump installed with 3/4 inch or 1/2 inch tube, you can install an ozone venturi injector.

NOTE: Ozonators are for outdoor use only.

NOTE: DO NOT USE WITH BALBOA SPA CONTROLLERS. Will cause an EMI interference.