SpaGuts SGVS520SZ Spa Control System, 5.5KW HTR, 54895 (NO Topside/Cords)

SPRING SPECIAL SALES!!!

• REGULAR PRICE AT $489.95
• TOTAL SAVINGS OF $50
• SALES FROM 04/23/2024 TO 05/04/2024. WHILE SUPPLIES LAST! 
• SALES ITEM MUST BE PURCHASED BY 05/04/2024.

SpaGuts brand Spa Control System SGVS520SZ, is powered by Balboa Water Group, but offers an upgraded 2-year warranty instead of the standard 1-year warranty provided on Balboa labeled components.  The SpaGuts branded products offer a better value and a longer warranty than all competing brands.

An option only available from SpaGuts, the SGVS520SZ is available factory configured to your exact specifications or as a retrofit kit that is easily field configured at the time of installation. Competitors only offer controllers as a retrofit "do it yourself kits" without the time saving factory configuration optionally available by SpaGuts.  Factory Configuration includes set-up and bench testing of Internal component circuits to work with your existing pumps, blower (or pump 3) and ozone, so you don't have to do any internal wiring, making your controller plug and play right out of the box.  Best value for most installers; saves time and prevents costly installation errors. Once the order is placed with the Factory Configuration Fee, we will contact you to collect information that is required to setup the controller.

This controller operates on 220V 60Hz (220V requires 4-wire service).  The SpaGuts brand SGVS520SZ controller is equipped with Balboa Water Group's patented M7 technology which allows the heater to be mounted either on the suction or discharge side of the pump for simplified installation. M7 Technology also completely eliminates the pressure switch which otherwise requires occasional manual adjustment, making the SpaGuts SGVS520SZ an ideal choice if a pressure switch is not necessary on your spa configuration.

SpaGuts OEM P/N:  11-175-4895

Features:

• Exclusive QR Code for Quick Access to Wiring Diagram, Operation/Installation/Technical Information
• Exclusive 2-Year Limited Warranty (Extended Warranty Option is available upon ordering)
• Jet Pump 1 circuit, Two Speed, 110/220V, 12A Max
• Jet Pump 2 circuit, Two Speed, 110/220V, 12A Max
• Blower or Jet Pump 3 circuit, One Speed, 110/220V, 10A Max
• Circ Pump circuit, 110/220V, 4A Max (24Hr when activated, Requires 25 GPM)
• Ozone circuit, 110/220V, 1A Max (Must Match Circ Pump Voltage)
• Audio/Video circuit, 110/220V, 2A Max (Constant Circuit)
• 12V 12W Light circuit with socket and reflector that fits most existing light housing, 8ft cord
• 5KW, 240V Flo-Thru Incoloy High Flow heater with M7 technology
• Stainless steel heater housing
• No Pressure Switch. Heater can be installed on suction or discharge side of pump
• UL Recognized for your safety
• Freeze protection
• High-limit protection
• Filtration mode
• Economy Mode
• Pair of 2.0 inch Heater Tailpieces with O-Ring Gaskets

Dimensions (Approx.):

• Controller: 12.0 inch L x 11.0 inch H x 4.5 inch W
• Heater: 15.0 inch L x 2.0 inch Diameter 

This control system is compatible with the following topside panels (Sold Separately): 50286 or 30-15-0286 VL700S, 53189 VL701S, 54112-01 VL701S (No Overlay), 54652 VL702S, 53811 VL700S, 54548 VL600S (Normally used for 2 Pumps, No Blower application)

This controller kit is also a replacement for the following part numbers:  10-201-6007, 56007HC1, 56007, 56224, G5157