Before Purchase Questions

663. Support-1: Wiring information for the (15-350-2140) 48-Frame 1.5HP 110V SD Waterway pump, 342061A-10.

246

Note that All pumps we sell have the wiring diagram on the motor. If you missed it, here is the wiring information for the (15-350-2140) 48-Frame 1.5 HP, 110V, Side Discharge, WaterWay pump, 342061A-10. Motor P/N: 3420610, Model number C48AA70A79R (Customer to verify. If different, provide ...

664. Support: Wiring information for the (15-350-2110) 48-Frame 1.0HP 110V SD WaterWay pump, 342041A-10

229

Note that All pumps we sell have the wiring diagram on the motor. If you missed it, here is the wiring information for the (15-350-2110) 48-Frame 1.0 HP, 110V, Side Discharge, WaterWay pump, 342041A-10. Motor P/N: 3420410, Model number F48AD32A79 (Customer to verify. If different, provide ...

665. Support: Wiring information for the (15-350-2120) 48-Frame 1.0HP 110V 1.5" CD Waterway Pump 342041A-15.

310

Note that All pumps we sell have the wiring diagram on the motor. If you missed it, here is the wiring information for the (15-350-2120) 48-Frame 1.0 HP, 110V, 1.5", Center Discharge, Waterway Pump, 342041A-15. Motor P/N: 3510831, Model number F48D32A79R (Customer to verify. If different, ...

666. Support: Wiring information for the (15-350-4014) Exec-48 1.5HP 110V WaterWay pump, 2.0" Intake, 342061A-1A

233

Note that All pumps we sell have the wiring diagram on the motor. If you missed it, here is the wiring information for the (15-350-4014) Executive-48, 1.5 HP, 110V, Side Discharge, WaterWay pump, 2" intake, 342061A-1A. Motor P/N: 3420610, Model number C48AA70A79R (Customer to verify. If ...

667. Support: Wiring information for the (15-350-4015) Exec-48 1.5HP 110V WaterWay pump, 2.5" Intake, 342061A-13

227

Note that All pumps we sell have the wiring diagram on the motor. If you missed it, here is the wiring information for the (15-350-4015) Executive-48 1.5 HP, 110V, Side Discharge, WaterWay pump, 2.5" intake, 342061A-13. Motor P/N: 3420610, Model number C48AA70A79R (Customer to verify. If ...

690. What is the minimum and maximum temperature setting for the VS-Series Spa Controllers?

244

For the VS Series Spa Controllers, the minimum temperature setting is 60ºF to 80ºF and the maximum temperature setting is 104ºF. Water temperature settings can be set within these ranges. NOTE 1: From the topside panel, the lowest setting is 80ºF. To bring down the temperature to as low ...

703. Life expectancy of a heater element.

232

Heater elements have a life expectancy of 8+ years, no matter if it's Incoloy, Tefel Coated or Titanium. The Tefel Coating and Titanium help by not allowing bad water to affect the heater element, but does not extend the life expectancy of the heater element. We have seen Incoloy heater elements ...

706. Support: New Air Switch is not activating a component.

219

You have reported that the air switch is not working properly. Check the following for troubleshooting: - If the air button is not activating the air switch, make sure the air tubing is connected from the bottom end of the air button to the air switch. We recommend using a new air button and ...

722. SUPPORT: GFCI breaker still tripping again after the system have been repaired

243

You have reported that the control system is tripping the GFCI breaker again after it was repaired and running for not too long. Check through the following items again. 1) Heater Element - Disconnect both heater cables from the circuit board to see if it stops the GFCI from tripping 2) ...

726. Support: Heatmax is tripping the GFCI breaker.

221

If the heatmax is tripping the GFCI breaker, please check the following to troubleshoot. 1) Make sure a Spa rated GFCI is being used. 2) Verify that 10-AWG wires are being used for the power supply. 3) Check for loose wire connections, and over heated wires inside the controller box. ...